[Chemical Knowledge]：Specification for storage and transportation of polymerization grade propylene

Safety storage and transportation specification
of polymerization grade propylene
1. Introduction

polymerization grade propylene is an important raw material for chemical production, widely used in plastics, synthetic rubber, synthetic fiber and other fields. However, due to the flammable, explosive and toxic properties of propylene, there is a greater safety risk during its storage and transportation. In order to ensure production safety and personnel health, it is very important to formulate strict storage and transportation specifications for polymerized propylene.

2. safety storage specification

1. storage facilities requirements: the storage facilities of polymerization propylene should meet the national safety standards, with fire prevention, explosion-proof, lightning protection, anti-static and other safety measures. Storage facilities should be regularly inspected and maintained to ensure that the equipment is intact.
2. Storage environment requirements: polymerization grade propylene should be stored in a dry, ventilated and cool environment, avoiding direct sunlight and high temperature. Temperature and humidity monitoring devices shall be installed in the storage site to ensure that the storage environment meets the specified requirements.
3. Storage capacity limit: In order to ensure safety, the container for storing polymer-grade propylene should have a certain capacity limit to avoid excessive storage leading to excessive pressure or temperature increase.
4. Safety management measures: The storage site shall be provided with safety warning signs to clarify the person responsible for safety management and emergency measures. Staff should be professionally trained to understand the nature and safe operating procedures of polymer grade propylene.

3. safety transport specification

1. transport vehicle requirements: transport polymerization grade propylene vehicles should have the appropriate qualifications and certificates, in good condition, in line with national safety standards. Transport vehicles should be regularly inspected and maintained to ensure safety and reliability during transportation.
2. Requirements for transportation personnel: transportation personnel should be professionally trained to understand the nature and safe operation procedures of polymerized propylene, and have the ability to respond to emergencies. During transportation, communication shall be kept unblocked and the progress of transportation shall be reported in time.
3. Transport packaging requirements: Polymeric grade propylene should be used in special packaging containers, tight and firm packaging to prevent leakage and damage. The packaging container shall be marked with information such as the name of the article, the danger and emergency measures.
4. Transportation route and time selection: safe transportation route and time should be selected to avoid passing through densely populated areas, open fire areas and other areas with high safety risks. High temperature periods and bad weather conditions should be avoided during transportation.

4. emergency measures

1. Leakage treatment: When polymer-grade propylene is found to be leaking, immediate measures should be taken to prevent the spread of the leakage and clean up the site in time. If the leakage is large, the emergency plan shall be started immediately and professionals shall be organized to deal with it.
2. Fire treatment: In case of fire, the fire source should be cut off immediately and special fire extinguishing equipment should be used to extinguish the fire. At the same time, personnel should be quickly organized to evacuate the scene and report the fire to the superior.
3. Poisoning treatment: if any person is poisoned, the poisoned person should be immediately moved to a well-ventilated place, and first aid measures should be taken and sent to the hospital for treatment in time. At the same time, the poisoning site should be cleaned and disinfected to prevent secondary poisoning accidents.

5. summary

polymerization grade propylene as an important raw material for chemical production, its safe storage and transportation is very important. In order to ensure production safety and personnel health, enterprises should formulate strict storage and transportation specifications for polymerized propylene, and strengthen the formulation and implementation of safety management measures and emergency plans. At the same time, the training and education of staff should be strengthened to improve safety awareness and operational skills. Only in this way can we ensure the safety and control of polymerization-grade propylene in the process of production, storage and transportation.