Welcome to the CHEMWIN
Trading Time : 09:30-17:00 GMT+8
Customer Service line : +86 400-8620-777
(09:30-18:00 GMT+8)
Inquire NowBargaining 10-21 09:11 Update
Contact person: 李越
Phone: +86 19117288062
Merchant Delivery
T/T ; L/C ;
Selected{{ form.amount }}Pieces {{ form.amount }} Total¥{{ form.price * form.amount }}
I. Solvents for rubber and paint and additives for aviation power fuel II. Used as chromatographic analysis standard substance and solvent, and also used in organic synthesis III. Used as raw material for producing polyester fiber and resin, paint, dye and pesticide 4. It is used to produce terephthalic acid and then produce polyester resin such as ethylene terephthalate and butylene glycol ester. Polyester resin is the raw material for producing polyester fiber, polyester sheet and polyester hollow container. Polyester Fiber is currently the largest synthetic fiber in China. It is also used as raw materials for paints, dyes, pesticides, etc. V. Solvent. Organic Synthesis. Gas chromatographic analysis standard. VI. Solvent. Organic Synthesis. Gas chromatographic analysis standard. It is used to produce terephthalic acid and then ethylene Terephthalate; Polyester resin such as butylene glycol ester. Polyester resin is raw
1. Petroleum xylene and coal tar xylene all contain a considerable amount of p-xylene. Because the boiling point difference between p-and M-Xylene is only ℃, distillation separation method cannot be adopted. At present, the research and development methods at home and abroad are low-temperature crystallization separation method; Adsorption separation method and complexation separation method. The low-temperature crystallization separation method uses the difference of the melting point of the xylylene isomer to separate. The main method is cryogenic step-by-step crystallization. The technology is mature and currently it is dominant in the separation of xylylene. However, the equipment of this method is huge, p-xylene is limited by co-melting point, and the recovery rate is low, only 60-70%. Adsorption separation method is a new method developed in 1970 s. Compared with cryogenic crystallization method, this method has less investment, low total production cost, high p-xylene yield and high purity, and may replace cryogenic crystallization method. 2. The raw material toluene carries out the transalkyl reaction in the transalkyl reactor to generate xylylene and benzene. Mixed Xylenes in the heterogeneous reactor, part of M-Xylene is isomerized to generate p-xylene, and the reactants are mixed with the xylenes from the transalkyl section after removing the light fraction in the stabilization tower to enter the decoc9 fraction tower, mixed Xylenes with high p-xylene content are obtained at the top of the tower, and the tower kettle is composed of components above C9. Mixed Xylenes obtained from the top of the stabilization Tower enter the adsorption and separation section, and non-molecular sieve-type solid adsorbent is used to adsorb p-xylene, desorbing p-xylene products with purity as high as 99.9%, and at the same time producing m-dimethylbenzene by-product. In addition, there is hydrogen fluoride-boron trifluoride extraction method.
R10: flammable. R38: irritates the skin. R23/24/25: toxic inhalation, skin contact and accidental swallowing.
UN 1307 3/PG 3
GHS02,GHS07
The warehouse is ventilated for cryodrying, light loading and unloading, and is stored separately from oxidant and acid.
P210;P261;P280;P370+P378
III
Warning
H226;H312+H332;H315
Traders: Chemwin
Whatsapp: +86 19117288062
Quick Response
Customer service is available 24/7 for extremely fast response
Exclusive Services
Dedicated consultant 1 to 1 service
Massive Resources
Connecting resources upstream and downstream
Technology Advanced
Technology Information Service
Transaction Security
Merchant authentication and risk control model
One-stop service
Trading logistics warehouse-style services