[Chemical Knowledge]：Specification for storage and transport of polymer-grade propylene and other foreign products

The safe storage and transportation specification
of polymer-grade propylene-and other foreign products
1. Introduction

polymer-grade propylene-and other foreign products as an important raw material in the production of chemical products, because of its special physical and chemical properties, the safety of storage and transportation process has a very high demand. In order to ensure personnel safety and environmental protection, it is essential to establish strict storage and transportation regulations. This article will elaborate on the safe storage and transportation of polymer grade propylene-and other foreign products.

2. safety storage specification

1. Storage facilities requirements: the storage facilities of polymer-grade propylene-and other foreign products should meet the relevant safety standards, with fire prevention, explosion-proof, lightning protection, anti-static and other safety facilities. Gas detection and alarm device shall be set in the facility and linked with ventilation equipment.
2. Storage environment requirements: storage facilities should be dry, well ventilated, avoid direct sunlight. The storage temperature should be controlled within a suitable range to avoid the impact of too high or too low temperature on the material.
3. Storage capacity limit: In order to ensure safety, the storage capacity of storage facilities should be controlled within a reasonable range to avoid security risks caused by excessive storage.
4. Storage personnel management: Storage facilities should be equipped with professional operators to carry out regular safety inspections and inspections to ensure the safe operation of storage facilities.

3. safety transport specification

1. transport vehicle requirements: transport polymerization grade propylene-and other foreign products of the vehicle should have the corresponding qualification and certificate, the vehicle in good condition, in line with the relevant safety standards. The vehicle shall be equipped with fire prevention, explosion-proof, anti-static and other safety facilities.
2. Requirements for transportation personnel: transportation personnel should have corresponding qualifications and certificates, and have undergone professional training to understand the nature and transportation safety knowledge of polymerization-grade propylene and other foreign products.
3. Transport route planning: Transport routes shall be reasonably planned to avoid passing through densely populated areas, important facilities and other sensitive areas. During transportation, the vehicle shall run smoothly as far as possible to avoid violent vibration and collision.
4. Transportation process monitoring: the state and environmental conditions of polymer-grade propylene and other foreign products should be monitored in real time during transportation to ensure transportation safety.

4. emergency treatment measures

1. Leakage treatment: in the process of storage and transportation, once the leakage of polymerization grade propylene and other foreign products occurs, the emergency plan should be started immediately, and effective measures should be taken to stop the leakage and prevent the leakage from spreading.
2. Fire treatment: in case of fire, alarm and fire fighting shall be carried out immediately. Use appropriate fire-fighting equipment to put out the fire, and pay attention to protect the safety of personnel on site.
3. Poisoning treatment: if any person is poisoned, the poisoned person should be moved to a safe area immediately, and first aid measures should be taken and sent to hospital for treatment in time.

5. training and management

1. Personnel training: regular safety training for the staff engaged in the storage and transportation of polymerized propylene-and other foreign products to improve their safety awareness and operation skills.
2. Management system: Establish a sound management system for the storage and transportation of polymerized propylene and other foreign products, clarify various safety regulations and operating procedures, and ensure that various safety measures are effectively implemented.

6. summary

polymerization grade propylene and other foreign products as an important raw material in the production of chemical products, its safe storage and transportation is very important. Personnel safety and environmental protection can be effectively guaranteed by formulating strict storage and transportation norms and strengthening personnel training and management. In actual operation, the relevant regulations should be strictly observed to ensure the safe storage and transportation of polymer-grade propylene and other foreign products.