[Chemical Knowledge]：Specification for storage and transportation of antioxidant

Chemical production of raw materials in the field of anti-aging agent safety storage and transportation specifications

1. Introduction

in the field of chemical production of raw materials, anti-aging agent is an important class of additives, can improve the service life and stability of products. However, if the antioxidant is not handled properly during storage and transportation, it may cause safety accidents and environmental pollution. Therefore, it is very important to formulate strict safety storage and transportation regulations for anti-aging agents. This article will elaborate on the safety storage and transportation specifications of anti-aging agents to ensure safety and environmental protection in the production process. Classification and properties of 2. antioxidants in



There are many kinds of antioxidants, such as antioxidants, antiozonants, metal passivators, etc. Most of these compounds are toxic and corrosive and require special care during storage and transport.

3. safety storage specifications

1. Storage facilities: The antioxidant should be stored in a dry, cool, well-ventilated special warehouse, away from fire, heat and direct sunlight. The warehouse floor should be flat, non-slip, and equipped with fire prevention, explosion-proof, lightning protection and other safety facilities.
2. Storage container: The antioxidant should be stored in a special sealed container. The container should have good corrosion resistance and sealing performance to prevent leakage and volatilization.
3. Storage identification: obvious safety identification shall be set up in the warehouse, including warning signs of fire prevention, explosion-proof and toxic, and corresponding safety operation procedures and emergency plans shall be provided.
4. Inventory management: establish a strict inventory management system, regular inventory of anti-aging agents, to ensure that the accounts are consistent, to prevent misinvestment, misuse caused by safety accidents.

4. safety transport specifications

1. transport vehicles: should be selected with the appropriate qualifications and capacity of professional transport vehicles for antioxidant transport, to ensure that the vehicle in the transport process has good stability and safety.
2. Packaging requirements: Anti-aging agent in the transport process should use special packaging barrels or bags, packaging should be tight, firm, to prevent leakage and damage in the transport process.
3. Transportation route: Choose a reasonable transportation route, try to avoid passing through sensitive areas such as densely populated areas and water source protection areas, and reduce the impact on the environment.
4. transport personnel: transport personnel should be professionally trained, familiar with the nature of anti-aging agents and transport safety procedures, to ensure that in the transport process to deal with emergencies.

5. emergency plan and treatment measures

1. emergency plan: in the process of storage and transportation of antioxidant, should develop a detailed emergency plan, clear procedures and methods to deal with emergencies, to ensure that in the event of an accident can quickly take measures to reduce losses.
2. Treatment measures: in case of leakage, fire and other safety accidents, the emergency plan shall be started immediately, and measures such as cutting off the power supply in the accident area, using special equipment to recover the leakage, and using fire extinguishing equipment to extinguish the fire shall be taken to control the development of the accident. At the same time, report to relevant departments in a timely manner and seek the support of professional rescue forces.

6. training and supervision

1. Training: regular training for personnel engaged in the storage and transportation of antioxidants to improve their safety awareness and operational skills and ensure strict compliance with safety regulations at work.
2. Supervision: Establish an effective supervision mechanism, regularly inspect the storage and transportation process of antioxidants, discover and correct the existing safety hazards in time, and ensure the effective implementation of the specifications.

7. conclusion

antioxidant plays an important role in the field of chemical production raw materials, but its safety and environmental protection can not be ignored. By formulating strict storage and transportation regulations, strengthening personnel training and supervision, we can ensure the safety and environmental protection of antioxidants in the production process, and create a stable and sustainable development environment for enterprises.