Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > Specification for storage and transportation of polyacrylamide

[Chemical Knowledge]：Specification for storage and transportation of polyacrylamide

Read： 493 Time：12months ago Source：Transform the World with Simplicity

The safety of polyacrylamide storage and transportation specification

polyacrylamide (PAM) is a common chemical raw material, widely used in water treatment, papermaking, petroleum, mining and other fields. However, polyacrylamide can pose a hazard to the environment and personnel if not properly stored and transported. Therefore, it is essential to understand the safe storage and transportation specifications of polyacrylamide.
the dangers of
1. polyacrylamide

polyacrylamide itself is not dangerous, but under certain conditions, it may cause some potential hazards. For example, when polyacrylamide encounters strong acids or strong bases, it may decompose to produce toxic gases. In addition, the powder of polyacrylamide may irritate the eyes and skin, and may affect the respiratory system if inhaled into the lungs.

2. Polyacrylamide Storage Specification

In order to ensure the safe storage of polyacrylamide, the following specifications must be observed:

1. The storage place should be dry, ventilated, moisture-proof, and avoid direct sunlight.
2. Storage should be away from fire, heat, avoid contact with oxidants, acid and alkali substances.
3. During the storage process, check whether the package is in good condition regularly, and deal with any damage in time.
4. Fire fighting equipment shall be installed in the storage site and its effectiveness shall be checked regularly.

3. Polyacrylamide Transportation Specifications

In order to ensure the safe transportation of polyacrylamide, the following specifications must be observed:

1. Check whether the packaging is intact before transportation, and deal with any damage in time.
2. Avoid mixing with oxidants, acids and bases during transportation.
3. The transport vehicle shall have the functions of sun protection, rain protection and wind protection to ensure that the goods are not lost during transportation.
4. During transportation, traffic rules shall be observed to ensure driving safety.

4. polyacrylamide leakage treatment

If polyacrylamide leaks, the following measures should be taken:

1. Immediately cut off the leakage source to prevent the leakage from spreading.
2. Adsorption treatment of the leakage with adsorbent material.
3. Transport collected spills to designated waste disposal sites for disposal.
4. Clean the leakage area to ensure that it will not cause pollution to the environment.

In conclusion, understanding the safe storage and transportation regulations of polyacrylamide is essential to ensure the safety of personnel and the environment. Only by complying with relevant specifications can the safety of polyacrylamide be ensured during production, transportation and use.

Previous： Specification for storage and transport of cyclohexane

Next： Specification for storage and transportation of dichloroethane

News Categories