Read: 964
Time:20months ago
Source:Transform the World with Simplicity
Ethyl acrylate nitrile safety storage and transportation specifications
1. Introduction
Ethyl acrylate nitrile is an important chemical production raw material, widely used in synthetic rubber, plastics, fibers and other fields. However, due to its flammable and toxic properties, strict safety requirements are imposed on the storage and transportation of ethyl propyl acrylate nitrile. In order to ensure the safety of people's lives and property and promote the healthy development of the chemical industry, it is very important to formulate the safety storage and transportation specifications of ethyl propyl acrylate nitrile.
2. Ethyl Propyl Acrylate Nitrile Physical and Chemical Properties
Ethyl Propyl Acrylate Nitrile is a colorless transparent liquid with pungent odor. Density 0.91g/cm³, melting point -63 ℃, boiling point 156 ℃, flash point 54 ℃, refractive index 1.4047, viscosity 0.72mPa · s. Soluble in water, soluble in ethanol, ether and other organic solvents. In case of open flame, high heat or contact with oxidant, there is a danger of combustion and explosion.
3. Ethyl Propyl Acrylate Nitrile Safety Storage Specification
1. Storage facilities should comply with relevant national standards, with fire, explosion, lightning protection, anti-static and other safety facilities. The storage area should be set up with obvious safety warning signs, no fireworks.
2. The storage temperature should be controlled below 25 ℃, avoid direct sunlight, and maintain good ventilation.
3. The storage container should be made of stainless steel or glass, and avoid the use of iron, aluminum and other metal containers to avoid chemical reactions.
4. During the storage process, regular safety inspection shall be carried out to ensure that the storage facilities are intact and prevent leakage accidents.
4. Ethyl Propyl Acrylate Nitrile Safety Transport Specification
1. Transport vehicles should comply with relevant national standards, with fire, explosion, lightning protection, anti-static and other safety facilities. During transportation, the vehicle shall be driven smoothly to avoid violent vibration, collision and friction.
2. The temperature should be strictly controlled during transportation to avoid the influence of high temperature and low temperature on ethyl propyl acrylate nitrile.
3. Ensure that the container is airtight during transportation to prevent leakage. Transportation vehicles shall be equipped with leakage emergency treatment equipment, such as adsorption materials, fire sand, etc.
4. Avoid mixing with oxidants, acids, alkalis and other substances during transportation.
5. During transportation, relevant national laws and regulations and road transportation safety regulations shall be observed to ensure transportation safety.
5. Ethyl Propyl Acrylate Nitrile Leakage Emergency Treatment
1. In case of leakage accident, emergency plan shall be started immediately and professionals shall be organized to deal with it.
2. The fire source shall be cut off in the leakage area, open flame and smoking shall be prohibited, and electrostatic sparks shall be avoided.
3. Use special adsorption material to adsorb the leakage to avoid the diffusion of the leakage.
4. Leakage collected shall be handled by professional units to avoid environmental pollution.
6. conclusion
ethyl propyl acrylate nitrile as an important raw material for chemical production, its safe storage and transportation is very important. By formulating strict storage and transportation standards and strengthening safety management, we can effectively protect the safety of people's lives and property and promote the healthy development of the chemical industry.