Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of propyl methacrylate nitrile

[Chemical Knowledge]：Specification for storage and transport of propyl methacrylate nitrile

Read： 283 Time：20months ago Source：Transform the World with Simplicity

Propyl methacrylate nitrile is an important chemical raw material, which is widely used in synthetic fiber, plastic, rubber and other fields. However, propyl methacrylate nitrile has certain toxicity and danger, so it is necessary to strictly abide by relevant regulations during storage and transportation to ensure safety.

1.
of the dangers of propyl methacrylate nitrile
Propyl methacrylate nitrile is a colorless, transparent liquid with a pungent odor. It belongs to flammable, explosive, toxic chemicals, in case of fire, high heat or oxidant contact, there is a risk of combustion and explosion. In addition, propyl methacrylate nitrile is corrosive and can burn human skin, eyes and respiratory tract.

2. safety storage specifications for propyl methacrylate nitrile

1. The storage place should be dry, ventilated and cool, away from open flames, heat sources and oxidants.
2. The storage container shall be a special container with good sealing performance to avoid leakage and volatilization.
3. The storage area shall be provided with obvious safety warning signs, and equipped with corresponding fire-fighting equipment and leakage emergency treatment equipment.
4. Check and maintain the storage container regularly to ensure that it is intact.

3. Propyl Methacrylate Nitrile Transport Specification

1. Transport vehicles should comply with relevant standards, with fire prevention, explosion prevention, leakage prevention and other safety measures.
2. During transportation, it should be stable to avoid violent vibration, collision and friction.
3. Transportation personnel should be professionally trained and familiar with the properties of propyl methacrylate nitrile and transportation safety knowledge.
4. During transportation, relevant laws, regulations and regulations shall be observed to ensure safe transportation.

4. Propyl Methacrylate Nitrile Leakage Emergency Treatment

1. Quickly evacuate the personnel from the contaminated area to the safety zone, isolate them and strictly restrict access.
2. Cut off the fire source. It is recommended that emergency personnel wear self-contained positive pressure breathing apparatus and protective clothing.
3. Do not directly contact the leakage, as far as possible to cut off the source of leakage.
4. Prevent inflow into restricted spaces such as sewers and flood discharge ditches.
5. a small amount of leakage: with sand or other non combustible material adsorption or absorption, can also be washed with a lot of water, wash water diluted into the waste water system.
6. A large number of leakage: build a dam or dig a pit to accommodate, covered with foam, reduce the steam disaster. Transfer to the tank or special collector with explosion-proof pump, recycle or transport to the waste treatment site for disposal.

In conclusion, as an important raw material for the production of chemical products, the safety and storage and transportation regulations of propyl methacrylate nitrile are very important. Relevant enterprises and individuals should strictly abide by relevant regulations and operating requirements to ensure safety during storage and transportation and prevent accidents.

Previous： Specification for storage and transport of butyl ethyl acrylate nitrile

Next： Specification for storage and transport of ethyl propyl acrylate nitrile

News Categories