Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of 2,4-dimethyl-3-ethylpentanol

[Chemical Knowledge]：Specification for storage and transport of 2,4-dimethyl-3-ethylpentanol

Read： 245 Time：19months ago Source：Transform the World with Simplicity

2,4-Dimethyl-3-ethyl pentanol is a common chemical raw material, which is widely used in various chemical production processes. However, due to its flammable and toxic properties, it is necessary to strictly comply with relevant safety regulations during storage and transportation to ensure the safety of personnel and the environment.

1. safety storage specification

1. The storage place should be selected in a dry, ventilated and cool place, away from fire, heat and direct sunlight.
2. The storage container shall be made of materials with good sealing performance and corrosion resistance, such as stainless steel or glass fiber reinforced plastic.
3. The storage area shall be provided with obvious safety warning signs, and equipped with corresponding fire-fighting equipment and leakage emergency treatment equipment.
4. Check and maintain the storage container regularly to ensure that it is intact and prevent leakage.

2. transport code

1. transport vehicles should meet the relevant standards, with fire, explosion, leakage and other safety measures.
2. Keep running smoothly during transportation to avoid severe vibration, collision and friction.
3. Transport personnel should be professionally trained to understand the nature of 2,4-dimethyl-3-ethylpentanol and knowledge of transport safety.
4. Relevant laws, regulations and regulations shall be observed during transportation to ensure transportation safety and compliance.

3. leakage emergency treatment

1. If a leakage accident occurs, the leakage source should be cut off immediately, and sand, dry lime or soda ash should be mixed to absorb residual liquid.
2. Avoid leakage into sewers, drains and other restricted spaces to prevent environmental pollution.
3. For a small amount of leakage, a large amount of water can be used for washing, and the washing water will be diluted into the waste water system.
4. For a large number of leaks, embankments or pits should be constructed and covered with foam to reduce steam disasters. Transfer to the tank or special collector with explosion-proof pump, recycle or transport to the waste treatment site for disposal.

In short, 2,4-dimethyl-3-ethyl pentanol, as a common chemical raw material, needs to strictly comply with relevant safety regulations during storage and transportation to ensure the safety of personnel and the environment. At the same time, for possible leakage accidents, corresponding emergency treatment measures should be formulated to reduce the impact on the environment and losses.

Previous： Specification for storage and transport of 2-methyl -3-ethyl pentanol

Next： Specification for storage and transportation of benzene

News Categories