Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of m-butylphenol

[Chemical Knowledge]：Specification for storage and transport of m-butylphenol

Read： 393 Time：20months ago Source：Transform the World with Simplicity

1. Introduction

M-butyl phenol is an important raw material for the production of chemical products, widely used in plastics, rubber, paint, ink and other fields. However, due to its toxicity and flammability, strict compliance with relevant regulations is required to ensure safety during storage and transportation. This article will detail the safe storage and transportation specifications for m-butylphenol.

2. the physicochemical properties of m-butyl phenol

m-butyl phenol is a white or yellowish crystalline powder with a molecular formula of C10H14O and a molecular weight of 146.22. It has a strong phenolic taste, insoluble in water, soluble in alcohol, ether and other organic solvents. m-butylphenol has a relatively high melting point of 52-55°C, a boiling point of 225°C and a flash point of 104°C.

3. the harmfulness of m-butyl phenol

m-butyl phenol has certain harm to the human body, and its main toxic effect is the damage to the central nervous system and digestive system. Exposure to high concentrations of m-butyl phenol can cause headache, dizziness, nausea, vomiting and other symptoms, and in severe cases can lead to coma and death. In addition, m-butyl phenol is also irritating and corrosive, and has an irritating effect on the skin and eyes.
Safety storage specifications for
4. m-butyl phenol

1. The storage place should be dry, ventilated and cool, away from fire and heat sources.
2. The storage container shall be one with good sealing performance to prevent leakage of m-butyl phenol.
3. The storage area shall be provided with obvious safety warning signs, and smoking and open fire shall be prohibited.
4. Regular safety inspection shall be carried out in the storage process, and any abnormal situation shall be handled in time.
Safety transportation specifications for
5. m-butylphenol

1. Before transportation, check the safety performance of the transportation vehicle to ensure that the vehicle meets the relevant requirements.
2. During transportation, the vehicle speed should be kept stable, and operations such as sudden braking and sharp turns should be avoided.
3. Transportation vehicles shall be equipped with corresponding fire fighting equipment and leakage emergency treatment equipment.
4. During transportation, relevant road traffic safety regulations shall be observed to ensure safe transportation.

6. m-butyl phenol leakage emergency treatment specification

1. found m-butyl phenol leakage, should immediately stop the operation, close the source of leakage.
2. Absorb the spill with a mixture of sand, dry lime or soda ash and collect it in a sealed container.
3. In case of a large amount of leakage, embankments or pits shall be constructed and covered with foam to reduce steam disasters.
4. Ventilate the leakage area to ensure safety.

7. conclusion

m-butyl phenol is an important raw material for chemical production, and its safe storage and transportation are very important. The relevant storage and transportation specifications should be followed to ensure its safety during storage and transportation. At the same time, a sound leakage emergency treatment mechanism should be established to deal with possible leakage accidents. Only in this way can we ensure production safety and promote the stable development of the chemical industry.

Previous： Specification for storage and transport of o-butylphenol

Next： Specification for storage and transport of p-butylphenol

News Categories