Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of o-butylphenol

[Chemical Knowledge]：Specification for storage and transport of o-butylphenol

Read： 804 Time：20months ago Source：Transform the World with Simplicity

1. of safety storage and transportation specification
of o-butyl phenol Introduction

o-butyl phenol is a common chemical raw material, widely used in plastics, resins, rubber, coatings and other fields. However, due to its toxicity and flammability, it is necessary to strictly comply with relevant safety regulations during storage and transportation to ensure the safety of personnel and the environment. This article will detail the safety storage and transportation specifications of o-butylphenol.

2. the physicochemical properties of o-butylphenol

o-butylphenol is a colorless or slightly yellow liquid with a special odor. Its molecular formula is C10H14O and its molecular weight is 150.22. o-butylphenol has a melting point of -13°C, a boiling point of 225°C, a flash point of 104°C and a density of 0.963g/cm3. It is insoluble in water, but soluble in alcohol, ether, benzene and other organic solvents. O-butyl phenol is toxic and flammable, and has an irritating effect on human skin and eyes.

3. the safety storage specifications of o-butyl phenol

1. The storage place should choose a dry, ventilated and cool place, avoid direct sunlight and high temperature.
2. The storage container shall be a special container with good sealing performance to avoid leakage and volatilization.
3. Obvious safety signs and warning signs shall be set up in the storage area, and fireworks and open flames are prohibited.
4. During the storage process, the safety status of containers and storage areas should be checked regularly, and any abnormalities should be handled in time.
5. Operators should be professionally trained to understand the physical and chemical properties and safety storage specifications of o-butyl phenol, and wear professional protective equipment.

4. of o-butyl phenol safety transportation specifications

1. Transport vehicles should comply with relevant standards, with explosion-proof, fire-proof, anti-static and other safety facilities.
2. Keep running smoothly during transportation to avoid severe vibration and collision.
3. During transportation, it should be kept away from open flames and high temperature areas, and it is forbidden to mix with oxidants, acids and other substances.
4. During transportation, the safety status of goods and vehicles should be checked regularly, and any abnormalities should be handled in time.
5. Transport personnel shall be professionally trained to understand the physical and chemical properties and safety transport specifications of o-butylphenol and wear professional protective equipment.

5. emergency treatment measures

1. skin contact: immediately take off contaminated clothing, rinse with plenty of flowing water for at least 15 minutes. See a doctor.
2. Eye contact: Lift the eyelid immediately and rinse thoroughly with plenty of flowing water or normal saline for at least 15 minutes. See a doctor.
3. Inhalation: Quickly leave the site to fresh air. Keep the airway unobstructed. If breathing is difficult, give oxygen. If breathing stops, give artificial respiration immediately. See a doctor.
4. Ingestion: Drink plenty of warm water and induce vomiting. See a doctor.
5. Leakage treatment: quickly evacuate the personnel from the contaminated area to the safe area, isolate them and strictly restrict access. Cut off the fire source. It is recommended that emergency personnel wear self-contained positive pressure breathing apparatus and protective clothing. Cut off the leak source as much as possible. Prevent from flowing into restricted spaces such as sewers and flood drainage ditches. Small amount of leakage: adsorption or absorption with sand or other non-combustible materials. It can also be washed with a large amount of water and diluted with washing water into the waste water system. Large leakage: build embankments or dig pits to contain. Transfer to tank truck or special collector by pump, recycle or transport to waste disposal site.

6. conclusion

o-butyl phenol as a common chemical production raw material, in the process of storage and transportation need to strictly abide by the relevant safety regulations, in order to ensure the safety of personnel and the environment. By understanding the physical and chemical properties of o-butyl phenol, safety storage and transportation specifications and emergency treatment measures, accidents can be effectively prevented and the safety of production can be guaranteed.

Previous： Specification for storage and transport of p-isopropylphenol

Next： Specification for storage and transport of m-butylphenol

News Categories