Current Location： Home > News > Chemical Knowledge > Specification for storage and transportation of ethylene-propylene rubber

[Chemical Knowledge]：Specification for storage and transportation of ethylene-propylene rubber

Read： 761 Time：12months ago Source：Transform the World with Simplicity

1. Introduction

Ethylene-propylene rubber (EPR) is a common chemical raw material, which is widely used in many fields because of its excellent performance. However, if it is not handled properly during storage and transportation, it may cause safety accidents. Therefore, in order to ensure the safe storage and transportation of ethylene-propylene rubber, it is very important to formulate a set of standardized storage and transportation specifications.

2. the properties and hazards of ethylene-propylene rubber

ethylene-propylene rubber is a colorless and transparent polymer compound with good oxidation resistance, ozone resistance, weather resistance and chemical resistance. However, under certain conditions, ethylene-propylene rubber may decompose to produce harmful gases, causing harm to the human body and the environment. In addition, ethylene-propylene rubber also has a certain degree of flammability, if it encounters an open flame or high temperature, it may cause a fire.
Safety storage specifications for
3. ethylene propylene rubber

1. The storage place should be in a cool, ventilated and dry place, avoiding direct sunlight and high temperature.
2. The storage site shall be equipped with fire fighting equipment and leakage emergency treatment equipment.
3. Ethylene-propylene rubber should be stored in a sealed container to avoid contact with air.
4. During storage, the tightness of the container and the quality of the ethylene-propylene rubber should be checked regularly to ensure that there is no leakage or deterioration.

4. of ethylene propylene rubber safety transport specification

1. Transport vehicles should have fire prevention, explosion-proof, anti-static and other safety measures to ensure the safety of the transport process.
2. During transportation, it should be kept stable to avoid violent vibration and collision.
3. During transportation, keep away from open flame and high temperature area to avoid fire.
4. In the process of transportation, relevant laws, regulations and regulations should be observed to ensure the safety and legality of transportation.

5. ethylene-propylene rubber leakage emergency treatment specification

1. If ethylene-propylene rubber leakage occurs, the emergency treatment plan should be started immediately and effective measures should be taken to control the leakage.
2. A warning line shall be set up in the leakage area to prevent open flames and high-temperature equipment from entering to prevent fire.
3. Use special equipment to recover the leaked ethylene propylene rubber to avoid environmental pollution.
4. Clean and disinfect the leakage area to ensure that it will not cause harm to human body and environment.

6. training and management specifications

1. Conduct safety training for personnel engaged in the storage and transportation of ethylene-propylene rubber to improve their safety awareness and operational skills.
2. Establish a sound management system for the storage and transportation of ethylene-propylene rubber, and clarify various safety regulations and operating procedures.
3. Regularly inspect and maintain storage and transportation facilities to ensure the normal operation and safe use of facilities.

7. conclusion

ethylene propylene rubber as an important raw material for chemical production, its safe storage and transportation is very important. By formulating standardized storage and transportation specifications and strengthening personnel training and management, the safe storage and transportation of ethylene-propylene rubber can be effectively guaranteed and safety accidents can be avoided. Therefore, all relevant enterprises should strictly abide by the relevant norms and standards to ensure the storage and transportation safety of ethylene propylene rubber.

Previous： Specification for storage and transportation of anisole

Next： Specification for storage and transport of cyclohexanone oxime

News Categories