Current Location： Home > News > Chemical Knowledge > Specification for storage and transportation of anisole

[Chemical Knowledge]：Specification for storage and transportation of anisole

Read： 540 Time：12months ago Source：Transform the World with Simplicity

Safe storage and transportation specifications

Anisole, also known as phenoxybenzene or phenoxymethane, is an organic compound used mainly as a solvent, fragrance and pharmaceutical intermediate. Due to its wide range of applications, it is important to ensure safety during storage and transportation. This article will discuss in detail the safe storage and transportation specifications of anisole.

1. the physical and chemical properties of anisole

anisole is a colorless and transparent liquid with aromatic odor. It is insoluble in water, but is miscible with many organic solvents. Anisole has a high flash point and is a flammable substance, but its vapor is mixed with air to form a mixture with a low risk of explosion. In addition, anisole is also toxic, and prolonged exposure or inhalation of anisole vapors may cause neurological damage and skin irritation.

2. anisole storage specification

1. storage facilities: anisole should be stored in a cool, dry, well-ventilated special warehouse. The warehouse shall be far away from fire and heat sources and equipped with corresponding fire fighting equipment.
2. Storage container: Anisole should be stored in a well-sealed container to prevent leakage. Storage containers should be inspected and maintained regularly to ensure that they are intact.
3. Storage limit: According to relevant regulations and standards, the storage of anisole in the warehouse should be controlled within a safe range to avoid safety risks caused by excessive storage.

3. anisole transport specification

1. transport vehicles: anisole should use special dangerous goods transport vehicles, vehicles should comply with relevant regulations and standards, with effective fire prevention, explosion prevention, leakage prevention and other safety measures.
2. Transport packaging: The transport packaging of anisole should comply with relevant standards and have sufficient strength and tightness to prevent leakage during transportation.
3. Transportation route: The transportation route of anisole should choose safe roads, and try to avoid prosperous urban areas and densely populated areas to reduce the impact on the public.

4. emergency measures

during storage and transportation, once anisole leakage accident occurs, the following emergency measures should be taken:

1. immediately cut off the power supply of the accident area and close the corresponding valves to prevent the accident from expanding.
2. Use special equipment to recycle the leaked anisole to avoid environmental pollution.
3. Use sand, dry lime and other adsorption materials to cover the leakage area to reduce the volatilization of anisole.
4. Ventilate the leakage area to reduce the concentration of anisole in the air.
5. If a person is exposed to anisole or has symptoms of poisoning, he or she should be immediately sent to a hospital for treatment.

5. training and supervision

To ensure the safety of anisole storage and transportation, relevant personnel should be professionally trained and supervised. The training content should include the physical and chemical properties of anisole, safety operation procedures, emergency measures, etc. At the same time, the storage and transportation facilities should be inspected and maintained regularly to ensure their normal operation.

In short, as a common raw material for chemical production, anisole must strictly comply with relevant regulations and standards during storage and transportation to ensure safety. By adopting standardized storage and transportation measures, as well as effective emergency measures and training supervision, the safety risks of anisole during storage and transportation can be reduced, and the safety of personnel and the environment can be guaranteed.

Previous： Specification for storage and transportation of polyether defoamer

Next： Specification for storage and transportation of ethylene-propylene rubber

News Categories