Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of PVC resin SG5

[Chemical Knowledge]：Specification for storage and transport of PVC resin SG5

Read： 624 Time：20months ago Source：Transform the World with Simplicity

pvc resin sg5 safety storage and transportation specification

1. introduction

pvc resin sg5 as an important chemical production of raw materials, widely used in building materials, wire and cable, packaging, medical equipment and other fields. Due to its special physical and chemical properties, PVC resin SG5 needs to strictly comply with relevant safety regulations during storage and transportation to ensure personnel safety and environmental protection. This article will detail the safety storage and transportation specifications for PVC resin SG5.

2. the physical and chemical properties of PVC resin SG5

PVC resin SG5 is a white or light yellow powder with good thermal stability and weather resistance, and can maintain good mechanical properties at high and low temperatures. However, PVC resin SG5 may cause fire or explosion when exposed to open flames, high temperatures or oxidants, so special care is required during storage and transportation.

3. PVC resin SG5 safety storage specifications

1. The storage place should choose a dry, ventilated and cool place to avoid direct sunlight and high temperature environment.
2. The storage site shall be equipped with corresponding fire-fighting equipment and leakage emergency treatment equipment.
3. PVC resin SG5 should be stored in a sealed container to avoid contact with air to prevent moisture absorption and agglomeration.
4. During storage, the sealing of the container should be checked regularly to ensure that the container is intact.
5. Obvious safety signs and warning signs shall be set up in the storage place, and fireworks and open flames are prohibited.

4. PVC resin SG5 safety transport specifications

1. transport vehicles should have the appropriate qualifications and certificates to ensure the safety and compliance of the transport process.
2. Keep running smoothly during transportation to avoid severe vibration and collision.
3. Transportation vehicles shall be equipped with corresponding fire fighting equipment and leakage emergency treatment equipment.
4. During transportation, the stability and integrity of the goods should be checked regularly to ensure that the goods do not leak and damage.
5. Relevant laws, regulations and standards shall be followed during transportation to ensure transportation safety and environmental protection.

5. PVC resin SG5 leakage emergency treatment specification

1. when a leak occurs, should immediately stop the operation, close the source of leakage, to prevent the spread of leakage.
2. Use special equipment or tools to clean up and recycle the leakage to avoid pollution to the environment.
3. Ventilate and clean the leakage area to ensure personnel safety and environmental hygiene.
4. If personnel come into contact with the leakage, rinse immediately with plenty of water and seek medical treatment.

6. conclusion

PVC resin SG5 is an important raw material for chemical production, and its safe storage and transportation are very important. By strictly complying with relevant safety regulations, the risk of personal injury and environmental pollution can be effectively reduced, and the safety and stability of production can be guaranteed. Therefore, the relevant personnel should strengthen the study and implementation of the safety storage and transportation specifications of PVC resin SG5 to ensure the safe and sustainable development of chemical production.

Previous： Specification for storage and transport of battery grade lithium carbonate

Next： Specification for storage and transportation of naphtha

News Categories