Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of 2-hydroxyethyl acrylate

[Chemical Knowledge]：Specification for storage and transport of 2-hydroxyethyl acrylate

Read： 1043 Time：12months ago Source：Transform the World with Simplicity

Acrylic acid -2-hydroxyl ethyl ester safe storage and transportation specifications

1. Introduction

acrylic acid -2-hydroxyl ethyl ester is a common chemical production raw materials, widely used in coatings, adhesives, inks and other fields. However, due to its flammable and toxic properties, strict compliance with relevant regulations is required during storage and transportation to ensure safety. This article will detail the safe storage and transportation specifications of 2-hydroxyethyl acrylate.

2. safe storage specification

1. Storage facility requirements: 2-hydroxyethyl acrylate should be stored in a cool, dry, well-ventilated special warehouse. The warehouse should be far away from fire and heat sources, and have safety measures such as fire prevention, explosion prevention and lightning protection.
2. Storage container requirements: 2-hydroxyethyl acrylate should be stored in a special container, and the container should have good sealing performance to prevent leakage. At the same time, the container should be inspected and maintained regularly to ensure that it is intact.
3. Storage limit requirements: According to relevant regulations, the storage quantity of 2-hydroxyethyl acrylate should be strictly controlled within a safe range to avoid safety accidents caused by excessive storage.
4. Safety identification requirements: corresponding safety identification should be set up in the conspicuous position of the warehouse, including flammable, toxic, no fireworks and other identification, to warn personnel to pay attention to safety.

3. safety transportation specification

1. Transportation vehicle requirements: 2-hydroxyethyl acrylate should be transported by special transportation vehicles, and the vehicles should have good sealing performance to prevent leakage. At the same time, the vehicle should be equipped with corresponding fire-fighting equipment and protective equipment to ensure the safety during transportation.
2. Requirements for transportation personnel: transportation personnel should have corresponding qualifications and experience, understand the nature and safety operation procedures of 2-hydroxyethyl acrylate, and be able to carry out emergency treatment.
3. Transportation route requirements: The transportation route should choose the route with smooth roads and smooth traffic as far as possible, and avoid driving in prosperous urban areas or densely populated areas. At the same time, transportation under severe weather conditions such as high temperature and lightning should be avoided.
4. Safety identification requirements: corresponding safety identification shall be set on the transportation vehicle, including flammable, toxic, no fireworks and other identification, to warn other vehicles and personnel to pay attention to safety.

4. emergency measures

1. Leakage treatment: in case of acrylic acid -2-hydroxy ethyl ester leakage, the leakage source should be cut off immediately, and special adsorption materials should be used to clean up the leakage. At the same time, the leakage area should be ventilated to avoid contact with personnel.
2. Fire treatment: in case of fire, fire fighting equipment such as dry powder and foam should be used immediately to extinguish the fire, and the police should be called to seek professional rescue in time.
3. Poisoning treatment: if any person is poisoned, the poisoned person should be moved to a well-ventilated place immediately, and corresponding first aid and protective measures should be given to seek medical treatment in time.

5. summary

2-hydroxyethyl acrylate as a common chemical production raw material, its safe storage and transportation is very important. In the process of storage and transportation, the relevant specifications shall be strictly observed to ensure that the facilities, containers and transport vehicles meet the requirements. At the same time, safety identification and emergency treatment measures shall be set and implemented to ensure the safety of personnel and the environment.

Previous： Specification for storage and transportation of ethanone

Next： Specification for storage and transport of methyl acetate

News Categories