Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of bisphenol F

[Chemical Knowledge]：Specification for storage and transport of bisphenol F

Read： 717 Time：12months ago Source：Transform the World with Simplicity

Safety of Bisphenol F Storage and Transportation Specification

1. Introduction

Bisphenol F(BPF) is an important chemical raw material, widely used in plastics, coatings, inks and other fields. Due to its special chemical properties, bisphenol F needs to strictly abide by certain safety regulations during storage and transportation to ensure the safety of personnel and the environment. This article will detail the safety storage and transportation specifications of bisphenol F.

2. Properties and Hazard
of Bisphenol F
Bisphenol F is a colorless or yellowish crystalline powder with a high degree of stability and thermoplasticity. However, bisphenol F has certain hazards to the human body and the environment, such as irritating the eyes and skin, which may cause allergic reactions, and long-term exposure may cause damage to the liver and kidneys. Therefore, special attention should be paid to safety during storage and transportation.

3. Bisphenol F storage specifications

1. Storage facilities: Bisphenol F should be stored in a dry, cool, well-ventilated indoor warehouse, away from direct sunlight and high temperatures.
2. Storage container: special sealed containers should be used to store bisphenol F to ensure that the container is intact and prevent leakage.
3. Storage identification: Obvious hazard identification shall be set up outside and inside the storage facility, including the name, harmfulness and emergency measures of bisphenol F.
4. Inventory management: Establish a strict inventory management system and regularly check the stored bisphenol F to ensure that there is no leakage, expiration and other phenomena.

4. bisphenol F transport specifications

1. transport vehicles: should use special dangerous goods transport vehicles for bisphenol F transport, to ensure that the vehicle meets the relevant safety standards.
2. Transport packaging: Bisphenol F should be transported in special sealed packaging, which should be firm, leak-proof and marked with dangerous goods identification.
3. Transportation routes: Choose reasonable transportation routes and avoid passing through sensitive areas such as densely populated areas and water source protection areas.
4. Transport personnel: Transport personnel should be professionally trained to understand the nature and hazards of bisphenol F and master emergency treatment measures.

5. emergency treatment measures

in the process of storage and transportation of bisphenol F, such as leakage, fire and other accidents, should take the following emergency treatment measures:

1. Leakage treatment: in case of leakage, should immediately cut off the leakage source, the use of adsorption materials to clean up the leakage, to avoid leakage spread to the environment.
2. Fire treatment: in case of fire, fire extinguishers, foam and other fire extinguishing equipment shall be used immediately to extinguish the fire, and alarm and evacuate nearby personnel.
3. Medical first aid: If a person feels unwell after exposure to bisphenol F, he or she should be sent to the hospital immediately for treatment.

6. conclusion

bisphenol F as an important chemical production raw material, in the process of storage and transportation need to strictly abide by the safety norms, to ensure the safety of personnel and the environment. By taking reasonable storage and transportation measures and effective emergency treatment measures, the harm of bisphenol F to personnel and environment can be reduced, and the safety and stability of production can be guaranteed.

Previous： Specification for storage and transportation of benzenesulfonyl chloride

Next： Specification for storage and transportation of furfural

News Categories