Current Location： Home > News > Chemical Knowledge > Specification for storage and transportation of potassium oxalate

[Chemical Knowledge]：Specification for storage and transportation of potassium oxalate

Read： 451 Time：19months ago Source：Transform the World with Simplicity

Potassium oxalate safe storage and transportation specification

1. Introduction

Potassium oxalate is a common chemical production raw materials, widely used in medicine, food, chemical and other fields. However, due to its chemical properties, potassium oxalate has certain safety risks during storage and transportation. In order to ensure the safe storage and transportation of potassium oxalate, it is very important to formulate standardized storage and transportation specifications.

2. the nature of potassium oxalate

potassium oxalate is a colorless crystal or white powder, with strong reducing and corrosive. It is easy to dissolve in water, and the aqueous solution is acidic. Potassium oxalate is thermally stable, but decomposes at high temperatures to produce toxic gases.

3. potassium oxalate safe storage specifications

1. The storage place should be dry, ventilated, cool, and avoid direct sunlight and high temperature.
2. The storage container should be made of corrosion-resistant materials, such as glass or plastic containers, and avoid the use of metal containers.
3. Storage should be away from fire, heat and oxidant, to prevent potassium oxalate thermal decomposition caused by fire or explosion.
4. During storage, regular inspections should be carried out to ensure that the container is intact and to prevent leakage.

4. potassium oxalate safe transportation specifications

1. Before transportation, check whether the packaging is intact, and replace it in time if it is damaged.
2. In the process of transportation, light loading and unloading should be carried out to avoid collision, extrusion and friction, and to prevent leakage caused by package damage.
3. Transportation vehicles shall be provided with safety measures such as fire prevention, explosion prevention and leakage prevention to ensure safety during transportation.
4. Avoid high temperature and direct sunlight during transportation, and maintain good ventilation.

5. potassium oxalate leakage emergency treatment measures

1. In case of leakage, the leakage source should be cut off immediately, mixed with sand, dry lime or soda ash and recycled to the waste treatment site.
2. In case of a large amount of leakage, an embankment or a pit shall be constructed to accommodate it, and then transferred to a tank car or a special collector by pump, and recycled or transported to a waste treatment site for disposal.
3. Emergency treatment personnel should wear protective equipment, such as protective gloves, protective glasses, etc., to avoid direct contact with potassium oxalate.

6. potassium oxalate safety operation specification

1. Operators should undergo professional training to understand the nature of potassium oxalate and safety operation procedures.
2. Before operation, check whether the equipment is in good condition. If there is any fault, it should be repaired or replaced in time.
3. Wear protective equipment such as protective gloves and protective glasses during operation to avoid direct contact with potassium oxalate.
4. Good ventilation should be maintained during operation to avoid poisoning or explosion caused by high concentration of potassium oxalate dust.

7. conclusion

potassium oxalate as a common chemical production raw material, there are certain safety risks in the process of storage and transportation. In order to ensure the safe storage and transportation of potassium oxalate, standardized storage and transportation specifications must be formulated and strictly implemented. At the same time, professional training and safety awareness education of operators should be strengthened to improve safety awareness and the ability to respond to emergencies. Only in this way can we ensure the safety of potassium oxalate in the process of production, storage and transportation, and ensure the safety of people's lives and property.

Previous： Specification for storage and transportation of sodium acetate

Next： Specification for storage and transportation of n-decanoic acid

News Categories