Current Location： Home > News > Chemical Knowledge > Specification for storage and transportation of sodium naphthalene acetate

[Chemical Knowledge]：Specification for storage and transportation of sodium naphthalene acetate

Read： 554 Time：14months ago Source：Transform the World with Simplicity

The safety of sodium naphthalene acetate storage and transportation specifications

1. Introduction

In the field of chemical production raw materials, sodium naphthalene acetate is a common compound with a wide range of uses. However, due to its potential hazards, it is important to ensure the safe storage and transportation of sodium naphthalene acetate. This article will detail the safety storage and transportation specifications of sodium naphthalene acetate to ensure personnel safety and environmental protection.

2. the nature and harm of sodium naphthalene acetate

sodium naphthalene acetate is a colorless or slightly yellow crystalline powder, with strong irritation and corrosion. Prolonged exposure to or inhalation of sodium naphthalene acetate may cause irritation and damage to the respiratory system, skin and eyes. In addition, sodium naphthalene acetate may also have a negative impact on the environment and ecosystems.

3. safety storage specifications

1. Storage facilities: sodium naphthalene acetate should be stored in a dry, cool, well-ventilated special warehouse. The warehouse shall be far away from fire and heat sources, and equipped with safety facilities such as fire prevention, explosion prevention and lightning protection.
2. Storage container: Sodium naphthalene acetate should be stored in a sealed container that meets relevant standards to avoid leakage and contamination. The container shall be marked with the name, danger and safety precautions of sodium naphthalene acetate.
3. Storage management: A strict storage management system shall be established, including regular inspection of the integrity and tightness of storage facilities and containers to ensure that the storage environment meets the specified requirements.

4. safety transport specification

1. transport vehicles: sodium naphthalene acetate should be transported by special transport vehicles, which should be equipped with corresponding protective facilities and fire fighting equipment.
2. Packaging requirements: The packaging of sodium naphthalene acetate should meet relevant standards to ensure that there will be no leakage and damage during transportation. The packaging shall be marked with the name, danger and safety precautions of sodium naphthalene acetate.
3. Transportation routes: safe transportation routes should be selected to avoid passing through sensitive areas such as densely populated areas and water source protection areas.
4. Transport personnel: transport personnel should be professionally trained to understand the nature, hazards and emergency treatment measures of sodium naphthalene acetate.

5. emergency treatment measures

1. skin contact: if the skin comes into contact with sodium naphthalene acetate, immediately remove the contaminated clothing, rinse with plenty of flowing water for at least 15 minutes, and seek medical treatment.
2. Eye contact: If the eye comes into contact with sodium naphthalene acetate, immediately lift the eyelid, rinse thoroughly with a large amount of flowing water or normal saline for at least 15 minutes, and seek medical advice.
3. Inhalation: If the dust or gas of sodium naphthalene acetate is inhaled, it should be immediately separated from the scene to the fresh air place to keep the respiratory tract unobstructed. If it is difficult to breathe, give oxygen and seek medical treatment in time.
4. Ingestion: If you eat sodium naphthalene acetate by mistake, you should drink plenty of warm water immediately and seek medical attention immediately after vomiting.

6. conclusion

sodium naphthalene acetate as a common chemical production raw material, its safe storage and transportation is very important. By following the safe storage and transportation practices described herein, the potential hazards of sodium naphthalene acetate to personnel and the environment can be reduced. In actual operation, relevant regulations and standards should be strictly observed to ensure personnel safety and environmental protection.

Previous： Specification for storage and transportation of myristic acid

Next： Specification for storage and transportation of sodium D-gluconate

News Categories