Current Location： Home > News > Chemical Knowledge > Specification for storage and transportation of EPDM

[Chemical Knowledge]：Specification for storage and transportation of EPDM

Read： 395 Time：14months ago Source：Transform the World with Simplicity

Ethylene-propylene-diene monomer (EPDM) is a common chemical raw material, which is widely used in automobile, construction, wire and cable and other fields. Due to its special chemical and physical properties, EPDM rubber needs to comply with certain safety regulations during storage and transportation to ensure the safety of personnel and the environment. This article will detail the safety storage and transportation specifications of EPDM.

1. safety storage specifications

1. Storage site requirements: EPDM rubber should be stored in a dry, cool, well-ventilated indoor place, avoid direct sunlight and high temperature environment.
2. Storage container requirements: The container for storing EPDM should have good sealing performance to prevent the entry of air and moisture, and should avoid contact with acidic, alkaline and other chemical substances.
3. Storage and stacking requirements: EPDM rubber should be stacked neatly to avoid pressure deformation of the rubber at the bottom caused by excessive stacking, and at the same time ensure that the stacking is stable to prevent tilting or collapse.
4. Fire safety requirements: The storage site should be equipped with corresponding fire-fighting equipment, such as fire extinguishers, fire hydrants, etc., and ensure that personnel are familiar with the use of methods, regular fire drills.

2. safety transport specification

1. transport vehicle requirements: transport EPDM vehicles should have fire prevention, explosion-proof, anti-static and other safety performance, at the same time should be maintained in good condition, to ensure that the transport process is stable and reliable.
2. Transportation packaging requirements: EPDM rubber should be packaged with packaging materials that meet the requirements, and the packaging should be tight and firm to prevent leakage or damage during transportation.
3. Transportation route requirements: The transportation route should be as far as possible to choose a smooth road and convenient transportation section to avoid bumpy and tortuous routes to reduce the damage to the rubber during transportation.
4. Transport personnel requirements: Transport personnel should have the corresponding chemical transport knowledge, understand the nature of EPDM and safe transport requirements, and should have the ability to respond to emergencies.

3. safety management norms

1. establish a sound safety management system: enterprises should establish a sound EPDM rubber storage and transportation safety management system, clear the safety regulations and operating procedures.
2. Strengthen personnel training: Regularly conduct safety training for personnel engaged in the storage and transportation of EPDM rubber to improve their safety awareness and operation skills.
3. Carry out regular safety inspection: carry out regular inspection on storage and transportation places to ensure the implementation of various safety measures and timely discover and eliminate potential safety hazards.
4. Establish emergency plans: formulate corresponding emergency plans for possible emergencies to ensure that measures can be taken quickly in emergency situations to ensure the safety of personnel and the environment.

In short, the safe storage and transportation specifications of EPDM are of great significance to ensure the safety of enterprise production. Enterprises should fully realize the importance of these norms, strengthen management and training, ensure the implementation of the norms, and provide a strong guarantee for the stable development of enterprises.

Previous： Specification for storage and transportation of low-compliance rubber

Next： Specification for storage and transport of neoprene

News Categories