Current Location： Home > News > Chemical Knowledge > Specification for storage and transportation of low-compliance rubber

[Chemical Knowledge]：Specification for storage and transportation of low-compliance rubber

Read： 789 Time：14months ago Source：Transform the World with Simplicity

In the field of chemical production raw materials, low-compliance rubber, as a common material, is widely used in the production of rubber products such as tires, hoses, and tapes. However, due to its unique chemical and physical properties, low-cis rubber has certain safety hazards during storage and transportation. In order to ensure the safe storage and transportation of low-cis rubber, this article will elaborate on the relevant specifications and requirements.

1. the nature of low-cis rubber

low-cis rubber is a polymer compound, mainly composed of carbon and hydrogen elements. Its molecular structure contains unsaturated bonds, which is easily affected by oxidation, heat, light and other factors and aging. In addition, low-cis rubber is also flammable and volatile, so it needs special attention during storage and transportation.

2. low-compliance rubber storage specification

1. Storage site requirements: low-compliance rubber should be stored in a dry, cool, well-ventilated indoor place, avoid direct sunlight and high temperature environment.
2. storage container requirements: should use a special sealed container for storage, to ensure that the rubber is not in contact with air, moisture, etc., to prevent aging.
3. Storage and stacking requirements: low-compliance rubber should be stacked according to varieties and specifications, and the stacking height should not be too high to maintain stability and prevent collapse.
4. Fire protection measures: The storage site shall be equipped with corresponding fire-fighting equipment and facilities, such as fire extinguishers, fire hydrants, etc., and ensure their effectiveness.

3. low-compliance rubber transport specification

1. transport vehicle requirements: should use special chemical transport vehicles for transport, to ensure that the vehicle has good sealing performance and fire prevention measures.
2. Transport and packaging requirements: Low-compliance rubber should be packaged with special packaging bags or barrels to ensure that the packaging is tight and does not leak.
3. Transportation route requirements: reasonable transportation route should be selected to avoid passing through dangerous areas such as high temperature and open fire.
4. Requirements for transportation personnel: transportation personnel should have relevant chemical transportation knowledge and skills, and be familiar with the nature and transportation specifications of low-compliance rubber.

4. safety operation specifications

1. During storage and transportation, the relevant safety operation procedures should be strictly observed to ensure the safety of personnel and equipment.
2. Obvious safety warning signs shall be set up in the storage and transportation places, and open fire and smoking shall be prohibited.
3. In the storage and transportation operation, should wear the corresponding protective equipment, such as gloves, masks, etc.
4. In the process of storage and transportation, if the leakage and aging of low-compliance rubber are found, timely measures shall be taken to deal with them.

5. emergency plan

In order to ensure the safety of low-compliance rubber during storage and transportation, corresponding emergency plans should be formulated. The emergency plan shall include the following contents:

1. Organization and responsibilities: clarify the organization of emergency response and the responsibilities of each member.
2. Early warning and reporting: Establish an early warning mechanism to discover potential safety hazards in a timely manner and report them in accordance with prescribed procedures.
3. Emergency response process: Describe the emergency response process in detail, including accident discovery, alarm, evacuation, rescue and other links.
4. Emergency materials reserve: reserve corresponding emergency materials and equipment in advance to ensure that they can be put into use in an emergency.

summary:

low-cis rubber has a wide range of applications in the field of chemical production raw materials, but its unique chemical and physical properties make it necessary to pay special attention to safety during storage and transportation. By complying with relevant storage and transportation specifications, strengthening safety operation management, and formulating comprehensive emergency plans, the safety of low-shun rubber during storage and transportation can be effectively guaranteed, and a stable supply of raw materials can be provided for chemical production.

Previous： Specification for storage and transport of solution polymerized styrene-butadiene rubber

Next： Specification for storage and transportation of EPDM

News Categories