Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > Manufacturing method and process of 3,4-dichloronitrobenzene

[Chemical Knowledge]：Manufacturing method and process of 3,4-dichloronitrobenzene

Read： 853 Time：12months ago Source：Transform the World with Simplicity

The manufacturing method
of 3,4-dichloronitrobenzene
1. Introduction

3,4-dichloronitrobenzene is an important chemical production raw material, widely used in pesticides, pharmaceuticals, dyes and other fields. Therefore, it is of great significance to study its manufacturing methods for improving production efficiency, reducing costs and improving product quality. This article will introduce a common manufacturing method of 3,4-dichloronitrobenzene.

2. materials and equipment

1. Materials: nitrobenzene, chlorine, sodium hydroxide, hydrochloric acid, etc.
2. Equipment: reaction kettle, condenser, agitator, storage tank, etc.

3. Manufacturing Steps

1. Add a certain amount of nitrobenzene to the reaction kettle, start the stirrer, and maintain a certain stirring speed.
2. Into the reaction kettle into chlorine gas, control the speed, so that the reaction temperature is maintained within a certain range.
3. When the color of the material in the reaction kettle becomes dark yellow, stop the chlorine gas, add a certain amount of sodium hydroxide solution, and adjust the pH value to neutral.
4. The reaction solution was transferred to a storage tank and acidified with hydrochloric acid to precipitate 3,4-dichloronitrobenzene.
5. The precipitated 3,4-dichloronitrobenzene was centrifuged, washed and dried to obtain a product with high purity.

4. Precautions

1. In the process of introducing chlorine gas, the introduction speed should be controlled to avoid excessive reaction, resulting in excessive temperature rise and affecting product quality.
2. When adjusting the pH value, the addition amount of sodium hydroxide solution should be controlled to avoid excessive addition resulting in a decrease in product purity.
3. In the process of acidification, the amount of hydrochloric acid added should be controlled to avoid excessive addition resulting in product loss.
4. In the process of centrifugal separation, washing, drying and other operations, attention should be paid to the operation specifications to avoid product contamination or loss.

5. Conclusion

Through the above steps, we can produce 3,4-dichloronitrobenzene with higher purity. In the actual production process, we need to pay attention to controlling the operating conditions of each step to ensure product quality and production efficiency. At the same time, we also need to carry out comprehensive safety management and environmental protection management of the production process to ensure the smooth progress of the production process and minimize the impact on the environment.

6. Outlook

With the continuous progress of science and technology and the continuous improvement of environmental protection requirements, the manufacturing method of 3,4-dichloronitrobenzene is also constantly improved and optimized. In the future, we need to further explore more environmentally friendly, efficient and safe manufacturing methods, improve product quality and production efficiency, reduce production costs, and make greater contributions to social and economic development and environmental protection.

Previous： Production method and process of cyanamide

Next： Production and manufacturing methods and processes of alkanes

News Categories