Current Location： Home > News > Chemical Knowledge > Manufacturing method and process of lead nitrate

[Chemical Knowledge]：Manufacturing method and process of lead nitrate

Read： 730 Time：20months ago Source：Transform the World with Simplicity

Manufacturing method
of lead nitrate
Lead nitrate is an important inorganic chemical, widely used in metallurgy, ceramics, glass, medicine, dyes and other fields. This article will introduce the manufacturing method of lead nitrate, including raw material preparation, reaction process, post-treatment and so on.

1. Raw Material Preparation

The main raw materials for the manufacture of lead nitrate are lead and nitric acid. Lead is generally used metal lead ingot, nitric acid is used industrial grade nitric acid. In order to ensure the purity and quality of the product, it is necessary to strictly control the quality of the raw materials to ensure that the impurity content in the raw materials is low and the purity is high.

2. reaction process

1. dissolved lead ingot
metal lead ingot into a certain amount of water, heated to a certain temperature, lead ingot dissolved lead salt solution. In order to accelerate the dissolution, an appropriate amount of nitric acid can be added as a catalyst.
2.
adding nitric acid The technical grade nitric acid is slowly added to the aqueous solution of lead salt while stirring to make it fully react to form a mixture of lead nitrate and water. It should be noted that the acid addition speed should be properly controlled to avoid too fast to cause too intense reaction and affect product quality.
3. Crystallization Separation
The mixture of lead nitrate and water produced by the reaction is cooled to a certain temperature to crystallize the lead nitrate. It is necessary to control the temperature and stirring speed during the crystallization process to obtain larger crystal particles and higher purity.

3. Post-Treatment

1. Filtration Washing
The crystallized lead nitrate crystals were separated by filtration and the impurity ions remaining on the crystal surface were washed with a small amount of water. It is necessary to maintain proper temperature and pH during filtration and washing to avoid crystal dissolution and product quality degradation.
2. Drying packaging
The washed lead nitrate crystals are dried and then packaged according to certain specifications to obtain the final lead nitrate product.

4. precautions

1. During the entire manufacturing process, the temperature and pH value need to be strictly controlled to ensure the purity and quality of the product.
2. Raw material lead ingot and nitric acid need to strictly control the impurity content to avoid the influence on the purity of the product.
3. During the crystallization process, it is necessary to control the stirring speed and cooling speed to obtain larger crystal particles and higher purity.
4. In the process of filtering, washing and drying, it is necessary to pay attention to maintaining proper temperature and pH value to avoid product quality degradation.

In short, the manufacturing method of lead nitrate needs to strictly control the process parameters and raw material quality of each link to ensure the purity and quality of the product. At the same time, it is necessary to pay attention to the safety and environmental protection issues in the production process, comply with relevant laws, regulations and standard requirements, and ensure the smooth progress of the production process and the health of employees.

Previous： Manufacturing method and process of thionyl chloride

Next： Production method and process flow of dysprosium oxide

News Categories