Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > The production and manufacturing method and process of oil slurry.

[Chemical Knowledge]：The production and manufacturing method and process of oil slurry.

Read： 422 Time：12months ago Source：Transform the World with Simplicity

The manufacturing method
of oil slurry
1. Introduction

In the field of chemical production raw materials, oil slurry is an important intermediate product, widely used in plastics, rubber, coatings, inks and other industries. There are a variety of manufacturing methods for slurry oil, and this paper mainly introduces a common manufacturing method.

2. materials and equipment

1. materials: petroleum hydrocarbon raw materials, catalysts, additives, etc.
2. Equipment: reaction kettle, stirrer, heater, cooler, filter, etc.

3. manufacturing steps

1 ingredients: according to a certain proportion of petroleum hydrocarbon raw materials, catalysts, additives, etc. into the reactor.
2. Heating reaction: turn on the stirrer and heat the reaction kettle to a certain temperature, so that the raw material is cracked under the action of the catalyst.
3. Cooling and separation: After the reaction is completed, stop heating and cool the reactor to separate the oil slurry from the gas.
4. Filtration and slag removal: The catalyst residue and other impurities in the oil slurry are filtered out through a filter to obtain a clear oil slurry product.

4. Precautions

1. Strictly control the reaction temperature and time to prevent excessive cracking from generating undesirable by-products.
2. Regularly check the operation of the equipment to ensure the normal operation of the equipment and prevent failures from affecting production.
3. Strengthen the safety management of the production site, abide by the relevant safety operation procedures, and prevent accidents.

5. Conclusion

Through the above steps, we can produce high-quality oil slurry products and provide a stable supply of raw materials for chemical production. In the actual production process, we need to flexibly adjust the process parameters according to the specific situation to ensure the quality and output of the product. At the same time, strengthen equipment maintenance and safety management to ensure the smooth progress of the production process.

Previous： Manufacturing method and process of wax oil

Next： The production and manufacturing method and process of base oil.

News Categories