Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > How to remove hot melt adhesive

[Chemical Knowledge]：How to remove hot melt adhesive

Read： 835 Time：20months ago Source：Transform the World with Simplicity

As a common adhesive material, hot melt adhesive is widely used in handmade and industrial production. However, after the hot melt adhesive is used, if it is not handled properly, it may cause a lot of trouble, such as remaining on clothes, damaging the surface of furniture, and polluting tools. Therefore, in daily life, the removal of hot melt glue has become a necessary skill. So, how to remove the hot melt adhesive? The following article from five aspects. Hot melt adhesive removal method in handmade

1.

Hot melt adhesive in handmade mainly appears in the use of hot melt adhesive guns and hot melt adhesive sticks. Generally speaking, when the hot melt glue stick is not completely dry, it can be removed by hand tear or nail polish.

hand tear method: remove the hot melt adhesive in the rod from the application or surface and gently tear off the fragments. However, this method usually removes a small piece of hot melt glue at most, and a large amount of glue needs to be removed with tools.

nail polish method: Apply a layer of nail polish on the hot melt adhesive. After the nail polish is completely dry, gently push down the nail polish and hot melt adhesive with your fingers. Hot melt glue usually sticks to the nail polish. At this time, you only need to gently press the nail polish, and the hot melt glue will be removed together.

2. the hot melt adhesive removal method on furniture

the hot melt adhesive on furniture will often cause us some trouble, because the furniture surface is easily damaged. Here are some practical ways to remove hot melt.

method 1: use a scraper. Use a spatula to gently scrape the hot melt adhesive, especially the black hot melt adhesive, it will be easily removed.

method 2: the use of wiping agent. Apply some detergent or wiping agent, gently wipe, hot melt adhesive will usually be easily removed.

method 3: use blue steel cloth. Cut the blue steel cloth into a small piece and spread it over the hot melt adhesive. Then take a hot melt gun to heat the blue steel cloth, the hot melt adhesive will be adsorbed to the blue steel cloth, then you can remove the remaining glue marks.

3. the hot melt adhesive removal method on clothes

When our clothes are stained with hot melt adhesive, we usually don't know what to do. In fact, there are countermeasures for this situation.

method 1: use a hair dryer. Turn the clothes upside down, use a hair dryer to dry the hot melt adhesive at high temperature, and then carefully tear off the adhesive marks. However, this method is easy to burn clothes, need special attention.