On May 13, Panjin Sanli Zhongke New Materials Co., Ltd. (hereinafter referred to as "Panjin Sanli") annual production project of 100000 tons of new materials was publicized before the environmental impact report was submitted for approval.
Project Name: panjin Sanli Zhongke New Material Co., Ltd. Annual Output 100000 Tons of New Material Production Project nature of construction: new construction site: panjin Fine Chemical Industry Development Zone, Shuangtaizi District, Panjin City floor Area: the plant covers an area of 269 mu, and the project covers an area of 260.6 mu. Total Project Investment:1.1 billion yuan construction content and scale: the project will build 12000 Nm3/h gas making plant (including 12000 Nm3/h gas making plant and 12000 Nm3/h syngas refining plant), 50000 tons/year MMA plant (including 50000 t/a formaldehyde plant and 50000 t/a MMA plant), 40000 tons/year n-propanol plant (including 80000 t/a propionaldehyde plant and 40000 t/a propanol plant), etc. Construction period: plan for 24 months
project Change Reason: after the original EIA was approved, Sanli Company adjusted the project production plan according to the market situation of raw materials and products, retaining only 3 of the 5 sets of production units, including gas making unit, MMA unit and propanol unit, of which the scale of gas making unit and MMA unit remained unchanged, and the scale of n-propanol unit increased from 30000 tons/year to 40000 tons/year. In addition to relying on the construction in progress, the storage and transportation system of this project adds 19 storage tanks with a total capacity of 5000 m3. Table 1 Change of Plant Scale of the Project project background: the company through the completion of the laboratory test, and in the Chinese Academy of Sciences Dalian Institute of Chemical Research Panjin Institute of Production and Research to complete the thousand-ton pilot test, on this basis, in April 2021, the industrialization project landed in Panjin, which belongs to the three forces of science and technology and the Chinese Academy of Sciences Dalian Institute of Chemical Research cooperation of scientific and technological achievements transformation project. Process Highlights: The project and the Chinese Academy of Sciences Dalian Institute of Chemical Technology cooperation, the process package by Wison Engineering and Sanli owners jointly developed, with ethylene and synthesis gas as raw materials, is the first set of C2 route of methyl methacrylate MMA production facilities, with fully domestic independent intellectual property rights. Project construction progress: The project started in May last year and started construction according to the original EIA approval. The construction progress of the main project is 70%, and the basic construction of other auxiliary facilities is completed. The construction progress of environmental protection facilities is 60%. It is reported that the project is expected to be completed by the end of May and trial production is planned before the end of July. Recent developments in other MMA projects
1, the market is hot! Another company enters MMA on April 9, Dong Mingdi, member of the Standing Committee of Cangzhou Municipal Committee, Secretary of the Party Working Committee of Bohai New Area and Secretary of Huanghua Municipal Committee, held a discussion with He Sai, Vice President of Global Sales of Honeywell UOP in the United States. Dong Mingdi expressed his expectation that the cooperation between Huanghua City of Bohai New Area and Honeywell UOP Company would be fully launched. On the basis of fully promoting the cooperation between Xinhai Group and Honeywell UOP Company, the process package of 425000 tons/year isobutane catalytic dehydrogenation unit and 350000 tons/year n-butane isomerization unit for the integration project of C4 new materials cooperated by Kaiyi Petrochemical and Honeywell will be implemented simultaneously and promoted in parallel. The carbon four new material integration project was invested and constructed by Hebei Kaiyi New Material Technology Co., Ltd., covering an area of 1070 acres, with a total investment of 10.2 billion yuan, and was completed in two phases. Among them, the first phase is expected to be completed and put into operation in June 2025. In addition, the second phase of the project plans to build a 104000-ton MMA device..2, Yan'an energy MMA pilot plant smoothly in the delivery. In mid-April, Yan'an Energy Chemical Ethylene Carbonyl Esterification Production undertaken by the Third Company methyl methacrylate technology development project (MMA pilot plant) completed 5 days ahead of schedule the project construction quality and safety management have been highly praised by Yan'an Energy and Chemical Company.
3, 17 billion coal-based new materials project will be built, including MMA. At the end of March, Hami Xinneng Coal Chemical Co., Ltd., a holding subsidiary of Xinjiang Energy (Group) Co., Ltd., planned to invest in coal-based new materials project feasibility study report review meeting was held in Urumqi.
Xinjiang Energy Group owns Shitoumei No.1 Open-pit Coal Mine in Santanghu Mining Area of Hami City, with a production capacity of 15 million tons/year. In the future, it will make clean and efficient use of the coal produced by Shitoumei No.1 Open-pit Coal Mine and convert it into MMA (methyl methacrylate). The investment is expected to reach 17 billion yuan. The application prospect of MMA is good. Li Jimin, party branch secretary and chairman of Hami Xinneng Coal Chemical Co., Ltd., said: "MMA is a raw material of plexiglass, which can be extended downstream to produce spectacle lenses, wind turbine blades, etc." the expert group participating in this meeting agreed that the project adopts domestic advanced technology and the latest technology in the industry, has a good technical leading and demonstration role, and has strong anti-risk ability, which is of great significance for leading and promoting the development of Xinjiang coal chemical industry. Finally, the evaluation opinions were formed and passed the evaluation smoothly. Mitsubishi Chemical to close MMA plant
on February 27, Mitsubishi Chemical issued a notice on stopping the production of MMA in the ACH process and acrylonitrile-related production in the Hiroshima plant and the withdrawal of some businesses.
It is reported that the annual capacity of MMA at the Hiroshima plant is 90000 tons, while Mitsubishi Chemical will continue to produce MMA monomer produced by C4 process at the Hiroshima plant, acrylonitrile and sodium glycinate at the Okayama plant and acrylamide at the Kanto plant. Mitsubishi Chemical shut down the Hiroshima plant that uses the ACH process to produce MMA monomer and acrylonitrile and acrylonitrile derivatives (chelating agents, acetonitrile, ammonium sulfate) in order to enhance the Group's competitiveness in MMA and acrylonitrile business and optimize the supply system, betting on its unique Alpha technology.5, major signing! MMA technology development will be completed on January 16, Nanjing Engineering Company and Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences signed a strategic cooperation agreement. The two sides will give full play to their advantages in technology, engineering, industry, capital and other fields in resources and energy chemistry, new materials, CCUS and other fields to build a long-term close and efficient cooperative relationship.
The two sides will adopt the "1 + N" cooperation model and actively carry out cooperation in scientific and technological innovation and project implementation. Focus on "strengthening scientific and technological innovation cooperation" and recently completed the development of MMA and DMMn technologies. In the future, we will continue to carry out in-depth scientific and technological innovation cooperation in the fields of green chemical industry, resource and energy chemistry, new materials, and CCUS. Source: Shuangtaizi District People's Government, olefins and high-end downstream
* Disclaimer: the content contained in the Internet, WeChat public number and other public channels, we maintain a neutral attitude to the views in the article. This article is for reference only, exchange. The copyright of the reprinted manuscript belongs to the original author and organization. If there is infringement, please contact the customer service of Huayi World to delete it.
All Categories
Mainly
Polyurethane
Fine Chemical
.png)
