2022 is nearing the end, in this year, due to the epidemic everywhere industry chain has a certain impact, so now how about the PO project construction progress? Let's take a look at the various situation introduction.
1. Guangxi Huayi HPPO project is about to start
On November 30,, the first batch of PVC products of the second phase of the Huayi Qinzhou Chemical New Material Integration Base project were successfully offline, marking the official completion and commissioning of the second phase of the Qinzhou Base project. It is reported that the third phase of the project will also start construction in the near future. The main layout of olefin materials and degradable materials, including three-phase hydrogen peroxide propylene oxide (HPPO) and polyether polyol integration project. 2. Zhejiang Petrochemical Phase II PO/SM Enters Start-up Feeding Preparation Stage
. Recently, the Zhejiang Petrochemical Phase II PO/SM (propylene oxide/styrene) project process pipeline pressure test completed, marking the project into the start-up feeding preparation stage. At present, with the successful completion of the pressure test of the process pipeline, the staff participating in the construction of the project department closely cooperate with the staff of the owner's workshop to do a good job in the airtightness of the pipeline and the commissioning of the equipment, so as to ensure the safe, high-quality and high-efficiency of the PO/SM (propylene oxide/styrene) project to achieve the successful goal of one-time start-up and feeding.
3. Changyi Hineng Chemical 80000 Tons PO Unit and Other EIA Approved
November 22,, Shandong Changyi Hineng Chemical Co., Ltd. 80000 tons/year propylene oxide unit relocation and co-production 80000 tons/year epichlorohydrin project environmental impact report was approved. The total investment of the project is 496.08 million yuan, of which environmental protection investment is 46 million yuan, accounting for about 9.27 of the total investment. It is expected to be put into operation by the end of December 2022, with a total area of 41820 m2. The new process of sodium salt circulation of propylene oxide existing in Zibo Yongda Chemical Co., Ltd. will be adopted to produce propylene oxide and coproduce epichlorohydrin. 4. Hubei this project started, including 20/450000 tons of PO/SM plant
on November 4,, the China Energy New Chemical High-end Materials Industrial Park project started. The project has a total investment of 12.6 billion and covers an area of 2202.27 acres. The project construction content includes: 250000 tons/year light hydrocarbon to propane-isobutane normal unit, 130000 tons/year maleic anhydride unit, 30000 tons/year dimethyl disulfide (DMDS) unit, 450000 tons/year ethylbenzene unit, 200000 tons/year propylene oxide -450000 tons/year styrene (POSM) unit, 100000 tons/year polyether polyol unit, 100000 tons/year ethylene propylene rubber unit, 100000 tons/year polyolefin elastomer (POE) unit and supporting public works system, etc. 5. Jiahong New Material High Performance New Material Phase I Phase I Project
October 28,, Jiangsu Jiahong new material high-performance new materials phase one phase of the project. It is reported that the total investment of the first phase of the project is 11.38 billion and the construction period is 36 months. The main construction contents include 6 sets of 450000-ton/year peroxide units, 2 sets of 400000-ton/year PO units, 2 sets of 260000-ton/year acrylonitrile units, 1 set of 60000-ton/year SAR units, 1 set of 300000-ton/year ammonia synthesis unit, 1 set of 120000-ton/year glycine unit, etc, the first phase will start in September 2021, including a 400000-ton PO plant and three 450000-ton hydrogen peroxide plants. 6. Taixing Yida 150000 Ton PO Project Trial Production Successfully
in mid-October, Taixing Yida's 150000-ton propylene oxide plant, after trial production and operation, has produced products that conform to the national standard GB/T 14491-2015 "Propylene Oxide for Industrial Use" and have been sold to the outside world except for its own use. This marks the success of Taixing Yida's 150000-ton propylene oxide plant.
7. Weiyuan Stock 300000 Tons PO Project EIA Approved
September 14,, Weiyuan Co., Ltd. 300000 tons of HPPO project EIA was approved, the total investment of the project 3.53 billion yuan, covers an area of 220110 m2. It mainly builds 1 set of 300000 tons of PO device, 3 sets of 300000 tons of hydrogen peroxide device. The project is planned to use propylene produced by the company's PDH as raw material, and the planned construction period is 20 months. 8. Xinjiang Yili to Build 600000 Tons PO Project
on August 24,, announced a number of investment projects on the official public platform of "investment in Xinjiang. According to reports, relying on its rich coal resources, Xinjiang plans to launch a series of coal chemical projects, including the 600000-ton PO coal project. The project plans to invest a total of 8.6 billion yuan, relying on propane resources such as Dushanzi Petrochemical and Baota Petrochemical, to build a 300000-ton HPPO unit in two phases. 9. Jingbian 400000 Tons PO Plant Signing
At the end of August, the 6th Silk Expo Yulin City Investment Promotion Conference and Key Project Signing Ceremony was held. Among them, Jingbian signed four contract projects, including Jingbian County Economic Development Zone Administrative Committee and Shaanxi Xingtai Yujing Chemical Co., Ltd. signed a comprehensive utilization of hydrogen with an annual output of 500000 tons of concentrated hydrogen peroxide/400000 tons of propylene oxide, with a total investment of 1.79 billion yuan. The project is implemented in two phases. The first phase covers an area of 280 acres with an investment of 0.848 billion yuan; the second phase covers an area of 300 acres with an investment of 0.942 billion yuan. Project planned construction cycle 2022-2024. 10. Hengli Petrochemical 1.6 million Tons/Year Fine Chemical Project EIA Acceptance
on August 17,, Hengli Petrochemical (Dalian) New Material Technology Co., Ltd. 1.6 million tons/year fine chemical project for EIA acceptance. With a total investment of 15.59 billion, the project is planned to be completed in 2025. The project is located in Dalian Changxing Island Petrochemical Park, covering an area of 49.2 hectares, mainly build 3 million tons/year K-COT plant, 660000 tons/year ethylbenzene plant, 27/600000 tons/year PO/SM plant, 20/190000 tons/year acrylic acid and ester plant, 300000 tons/year ABS plant, 300000 tons/year butyl octanol plant, 200000 tons/year polyether polyol plant, 260000 tons/year acrylonitrile plant, 50000 tons/year butyl acetate plant, 45/200000 tons/year MTBE/butene-1 plant, 30000 tons/year polybutene-1 plant and 100000 tons/year methylamine/DMF plant, etc. 11. Lianhong Xinke launched 300000 tons of PO, etc.
In early August, Lianhong Gerun (Shandong) New Materials Co., Ltd. conducted a second environmental impact assessment for the integration project of new energy materials and biodegradable materials. The project mainly builds 1.3 million tons/year DMTO, 200000 tons/year EVA devices, 300000 tons/year PO devices, 50000 tons/year PPC devices, etc., with a planned total investment of 11.31 billion yuan. 12. Tongkun Petrochemical launched 300000 tons of HPPO plant, etc.
August 1,
, Tongkun Qinzhou Green Chemical Base Phase I chemical new materials project EIA accepted, the total investment of the project is 20.97 billion yuan, the planned construction period is June 2022-June 2025, the main construction of 3 million tons/year PTA plant (including 2 sets of 35MW waste heat generating units), 600000 tons/year propane dehydrogenation (PDH) plant, 400000 tons/year polypropylene (PP) plant, 300000 tons/year propylene oxide (HPPO) plant (including supporting hydrogen peroxide plant), 150000 tons/year maleic anhydride plant (including 2 sets of 12MW waste heat generating units, 1 for use and 1 for standby)), 30000 tons/year methyl isobutyl ketone (MIBK) device, 150000 tons/year polyether polyol device, etc. 13. Sanyue Chemical plans to add 150000 tons of PO capacity
.
on July 29,, Shandong Sanyue Chemical 150000 tons/year hydrogen peroxide propylene oxide project was filed. As a traditional established PO key enterprise, Sanyue Chemical currently has 3 sets of chlorohydrin process PO units with a total capacity of 240000 tons/year, which will be completed in 2017 or before. If the new project is put into production, the total production capacity of PO will reach 390000 tons/year.
14. Oriental Shenghong launched POSM project
of on July 18th, Jiangsu Hongwei POSM and polyol project EIA documents to be approved, the project total investment of 6.034 billion yuan, mainly to build a set of 508000 tons/a ethylbenzene unit, a 20/450000 tons/a POSM device, a set of 112500 tons/a PPG device, a set of 25000 tons/year POP device. The planned construction period is 36 months, of which the POSM device is proposed to adopt the co-oxidation method propylene oxide co-production styrene technology transferred by Spanish REPSOL (Repsol) company. of 15. Haiquan Chemical PO/SM Project EIA Acceptance
on July 12,, Haiquan Chemical 20/450000 Ton PO/SM Project EIA was accepted. The project is located in Fujian Gulei Petrochemical Base, covering an area of 338530 m2 and a total investment of 4.36 billion yuan. It is planned to be put into operation in September 2024. This project adopts the production technology of 200000 tons/year propylene oxide co-production of 450000 tons/year styrene (hereinafter referred to as 20/450000 tons/year PO/SM plant) developed by Changzhou Ruihua Chemical Engineering Technology Co., Ltd. Using benzene and ethylene as raw materials to produce ethylbenzene, using ethylbenzene oxidation method to produce (PO/SM co-oxidation method) propylene oxide co-production of styrene.
16. China Chemical Tianchen Quanzhou 600000 Tons PO Project Started
on July 12, the Chinese chemical Tianchen Quanzhou 600000 tons/year PO project officially started construction, the project covers a total area of more than 1000 mu, with a total investment of 7.38 billion yuan, is located in the Nanshan area of Quangang Petrochemical Park, the total construction period is 36 months, using HPPO process, divided into two phases each to build a set of 300000 tons of hydrogen peroxide PO device. 17. Tianjin Bohua POSM Project Put into Production
June 27,, Tianchen company general contract Tianjin Bohua "two" relocation and renovation project 200000 tons/year propylene oxide co-production 450000 tons/year styrene unit (hereinafter referred to as POSM unit) a test run was successful, and produced qualified products. The production device adopts the Spanish Repsol co-oxidation process technology, is a national encouragement project, eliminated the backward chlorohydrin production process, in energy saving and emission reduction effect is obvious.
All Categories
Mainly
Polyurethane
Fine Chemical
.png)
