Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > The use of sodium dithionite need to pay attention to a few points

[Chemical Knowledge]：The use of sodium dithionite need to pay attention to a few points

Read： 885 Time：10months ago Source：Transform the World with Simplicity

In recent years, sodium dithionite as an important chemical reagent is widely used in various fields, such as food industry, pharmaceutical industry, chemical industry and so on. However, due to its certain volatility and corrosiveness, it is necessary to pay special attention to some matters during use to avoid accidents or personal injury. Therefore, in the use of sodium dithionite need to pay attention to the following points:
the
should be strictly in accordance with the operating procedures. In the use of sodium dithionite, must be strictly in accordance with the operating procedures to operate, to avoid the occurrence of accidents due to personal subjective reasons. Operators must be familiar with the characteristics and hazards of chemicals, and wear relevant protective equipment, such as goggles, protective gloves, etc. In the process of carrying these reagents, special care should be taken to avoid collisions and falls as much as possible to avoid leakage.

should pay attention to the storage environment and conditions. Because sodium dithionite is corrosive and volatile, special care is required during storage.

should be stored in a dry and ventilated place, away from direct sunlight and moisture.

shall be marked on the storage container, with clear name and nature, and attention shall be paid to prevent mixed loading and storage.

third, pay attention to safe use. In the process of using sodium dithionite, we must pay attention to the safe use method. For example, in the process of solution preparation, water should be added first and then the reagent should be added to avoid sputtering due to the violent reaction between the reagent and water.
During the use of
, the operating procedures must be observed, and the experimental process and operating steps must not be changed at will to avoid accidents.

pay attention to accident handling and first aid measures. In the process of using sodium dithionite, if an accident occurs, such as sputtering, leakage, etc., the corresponding first aid measures must be taken immediately, and the scene must be cleared in time to protect the safety of the surrounding personnel. At the same time, the accident should be reported to the relevant departments in a timely manner, and handled as required to avoid further expansion of the accident.

To sum up, the use of sodium dithionite requires special care, in strict accordance with the operating procedures for operation, and pay attention to the storage environment and conditions, comply with safe use methods, and deal with it in time in the event of an accident. Only in this way can we use this important chemical reagent more safely and provide better support for development in various fields. I hope everyone can pay attention to the above points when using sodium dithionite to ensure the safety of themselves and others.

Previous： Several Points of Attention Before Pumping of Double Suction Centrifugal Pump

Next： Matters needing attention and key points of operation in the preparation of butyl benzene

News Categories