Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > Precautions for Correct Use of Ammonium Peroxodisulfate

[Chemical Knowledge]：Precautions for Correct Use of Ammonium Peroxodisulfate

Read： 732 Time：13months ago Source：Transform the World with Simplicity

Ammonium peroxodisulfate is a commonly used chemical reagent, which is widely used in laboratory and industrial production. The correct use of ammonium peroxodisulfate can not only ensure the accuracy of the experiment, but also ensure the safety of the operator. Below we will introduce some precautions for the correct use of ammonium peroxodisulfate.

1. Wearing personal protective equipment
When using ammonium peroxodisulfate for operation, be sure to wear personal protective equipment, including lab clothes, protective glasses, chemical protective gloves and protective masks. These equipment can effectively protect your skin, eyes and respiratory system, and reduce the damage that ammonium persulfate can cause to health.

2. Follow the correct method of operation
in the use of ammonium peroxodisulfate, be sure to follow the correct method of operation.

should be operated in a well-ventilated laboratory environment, avoiding operations in enclosed spaces to prevent the accumulation of toxic gases.

in the preparation of solution or other experimental operations, should be in accordance with the correct ratio and steps, it is strictly prohibited to change the operation method.

3. Pay attention to the dilution and mixing of the solution.
ammonium peroxodisulfate is a chemical substance that is easily soluble in water, so pay special attention to its dilution and mixing when using it. When diluting, water should be added slowly and fully stirred to avoid the solution splashing out and causing burns to the skin and eyes.
care should also be taken when
ammonium peroxodisulfate is mixed with other chemicals to avoid harmful reactions.

4. Proper storage and handling of
After using ammonium peroxodisulfate, it should be stored in a dry, well-ventilated place, away from fire and oxidizing agents. When treating ammonium persulfate waste liquid, it should be classified and treated in accordance with relevant regulations, and it should not be poured into the sewer or other places at will to avoid pollution to the environment.

5. Waste treatment
After the use of ammonium peroxodisulfate, the waste generated also needs to be properly disposed. In accordance with the relevant provisions of chemical waste treatment, the waste shall be classified and stored and entrusted to professional institutions for treatment, and shall not be discarded or mixed at will. The correct use of ammonium peroxodisulfate in

requires strict compliance with operating procedures and safe operating procedures, so that safety first and health first. It is hoped that the introduction of this article can help you better understand the precautions for the use of ammonium peroxodisulfate and ensure your experimental operation and safety and health.