Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > Check the internal conditions of the reaction kettle

[Chemical Knowledge]：Check the internal conditions of the reaction kettle

Read： 503 Time：14months ago Source：Transform the World with Simplicity

Reactor is commonly used in chemical production equipment, for the operator, check the transfer is an important work. In the transfer operation, it is necessary to pay attention to some matters and skills to ensure the safety and efficiency of the production process. The following will introduce you to the matters needing attention and operation skills of the reaction kettle to check the transfer of materials.

1. check the internal situation of the reaction kettle
1. before the transfer, the first need to carefully check the internal situation of the reaction kettle. Including checking whether the stirrer, thermometer, level gauge and other equipment are normal, and ensuring that the equipment is intact.

2. With the help of professional instruments to detect the reaction kettle, to ensure that the equipment has no leakage, leakage and other security risks.

3. For corrosive reaction materials, special attention should be paid to the corrosion resistance inside the reactor to ensure that the equipment fully meets the safety requirements.

2. cleaning
1. cleaning work is an important step before checking the transfer, the need to remove the residue inside the reaction kettle clean, to ensure that the transfer is not contaminated.

2. Cleaning requires the use of professional cleaning agents and tools to ensure a thorough cleaning of the reactor.

3. After the cleaning work is completed, it is necessary to fully ventilate the inside of the reaction kettle to eliminate the residual smell of the cleaning agent and avoid the impact on the transfer material.

3. operation skills
1. when transferring materials, it is necessary to strictly follow the operation procedures to ensure the smooth progress of all steps.

2. For the case of a large number of material transfer, it is necessary to make sufficient preparations in advance, including material preparation, cleaning equipment, eliminating hidden dangers, etc.

3. In the transfer process, it is necessary to maintain the stability of the temperature and pressure inside the reactor to avoid negative effects on the transfer.

4. pay attention to safety
1. When transferring materials, it is necessary to strictly abide by the safety operation procedures to ensure the safety of personnel and equipment.

2. For toxic and corrosive materials, corresponding protective measures should be taken to avoid personal injury and equipment damage.

3. During the transfer process, it is necessary to monitor the internal situation of the reactor at any time. Once abnormal conditions are found, the transfer operation shall be stopped immediately and corresponding treatment shall be carried out.

above is about the reaction kettle to check the matters needing attention and operation skills. In the reaction kettle transfer operation, must be strictly in accordance with the operating procedures, and according to the actual situation to make full preparation and safety protection work. Only in this way can we ensure the safety and efficiency of the production process.