Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > Correct Use of Toluenesulfonyl Chloride and Precautions

[Chemical Knowledge]：Correct Use of Toluenesulfonyl Chloride and Precautions

Read： 535 Time：6months ago Source：Transform the World with Simplicity

Tosyl chloride is a common chemical raw material and intermediate, which is widely used in dye, medicine, pesticide and other industries. However, due to its high degree of corrosiveness and flammability, it must be used with extreme care and strictly abide by the operating procedures. The following are the precautions for the use of p-toluenesulfonyl chloride:

1. Understand the properties of toluenesulfonyl chloride And characteristics, including its corrosiveness, flammability, etc. Before use, be sure to read the product's safety instructions carefully to understand its hazardous characteristics and safe operation requirements.

2. When using tosyl chloride, you must wear protective equipment, including goggles, gloves, protective clothing, etc. Avoid contact with skin and eyes to prevent inhalation of its vapors.

3. The operating place using tosyl chloride must be well ventilated to ensure that the concentration of tosyl chloride in the air exceeds the safety standard. It is strictly prohibited to smoke, use open flame, and mix with oxidant and other flammable substances.

4. Tosyl chloride is a hazardous chemical and should be stored in a cool, dry, well-ventilated place. Prevent contact with moisture and humid environment, so as not to cause violent chemical reaction and produce danger.

5. When dealing with toluene sulfonyl chloride, it is strictly forbidden to pour it directly into the water. It should be poured slowly and stirred evenly to avoid generating a lot of heat and gas. At the same time, it is necessary to avoid contact with alkaline substances to avoid violent chemical reactions.

6. After the operation, the operating place and equipment should be cleaned in time to avoid potential safety hazards caused by residual tosyl chloride.

In general, for hazardous chemicals such as tosyl chloride, everyone must strictly abide by the operating procedures when using them to ensure their own safety. In addition, if you encounter any problems during use, you should stop the operation immediately and seek professional help in time. Only the correct use of toluene sulfonyl chloride, in order to better play its role, but also to ensure their own and other people's safety.

Previous： Matters needing attention and optimization scheme of amylase production screening

Next： Precautions for the use of the reaction kettle to ensure the safety of the experiment

News Categories