Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > Guide for the correct use of aluminum trichloride solution

[Chemical Knowledge]：Guide for the correct use of aluminum trichloride solution

Read： 765 Time：14months ago Source：Transform the World with Simplicity

Aluminum trichloride solution is a common chemical reagent, which is widely used in chemical industry, medicine and other fields. However, due to its corrosive and irritating properties, special attention should be paid to safety when using it. Here are some of the use of aluminum chloride solution need to pay attention to matters.

first, wearing protective gear. When using aluminum trichloride solution, be sure to wear personal protective equipment such as protective glasses, gloves and work clothes to avoid injury caused by splashing of the solution. At the same time, the experimental table should be kept clean and tidy to avoid splashing the solution on other materials.

second, avoid contact with water. Aluminum trichloride solution is strongly corrosive, so it is necessary to avoid contact between the solution and water during use to avoid violent chemical reactions. When diluting or mixing, the aluminum trichloride solution should be added first, and then the other reagents should be added slowly.

third, storage precautions. Aluminum trichloride solution should be stored in a dry and ventilated place, avoid moisture and direct sunlight. The storage container should be well sealed to avoid volatilization and leakage of the solution.

shall be stored in isolation from oxidants, alkalis and other chemicals during storage to avoid accidents.

Fourth, waste liquid treatment should be standardized. After using the aluminum trichloride solution, the waste liquid should be treated in accordance with relevant regulations to avoid pollution and harm to the environment. Under normal circumstances, the waste liquid should be collected and handed over to a professional waste liquid treatment unit for treatment, and should not be dumped at will. During the operation, it is necessary to strictly abide by the safety operation procedures. Once the solution splashes on the skin, eyes or clothing, it should be rinsed with plenty of water immediately and seek medical treatment in time.

the correct use of aluminum trichloride solution is essential. Only by strictly abiding by the safety operation procedures can the safety of the users be guaranteed to the greatest extent and the occurrence of accidents can be avoided. I hope everyone can always keep in mind that safety is the first when using aluminum trichloride solution, do a good job of protection, and ensure the safety of individuals and the environment.

Previous： Understanding melamine formaldehyde resin, make home more secure

Next： Precautions for the use of potassium borohydride

News Categories