Phenol ketone products

Plastic rubber

Current Location： Home > News > Chemical Knowledge > Semi-dry transfer film, coating precautions

[Chemical Knowledge]：Semi-dry transfer film, coating precautions

Read： 315 Time：8months ago Source：Transform the World with Simplicity

In recent years, semi-dry transfer film coating technology has been widely used in the field of industrial manufacturing. This coating method can not only improve the coating efficiency, but also achieve high-quality coating effect. However, when using semi-dry transfer film coating, we also need to pay attention to some matters to avoid coating quality problems.

to ensure that the painting equipment clean. In the coating process, if there is dust or impurities on the surface of the coating equipment, it is easy to cause poor coating quality and even coating failure. Therefore, before starting the coating, it is necessary to ensure that the coating equipment is in a clean state.

should pay attention to the temperature and humidity of the semi-dry film. Semi-dry transfer film needs to be carried out at a certain temperature and humidity during coating. Too high or too low temperature and humidity will affect the coating effect of semi-dry transfer film. Therefore, before painting, it is necessary to control the temperature and humidity to ensure that the coating is carried out under suitable environmental conditions.

should pay attention to the quality of the coating agent in the semi-dry transfer film coating process. It is very important to choose a coating agent with stable quality. Only by selecting a high-quality coating agent can the effect of coating and the quality of the coating film be guaranteed.

In addition, before painting, to do a good job of primer treatment. The quality of the primer is directly related to the adhesion and durability of the semi-dry film, so before coating, the primer must be carefully treated.

to reasonably control the coating thickness of semi-dry transfer film. If the coating thickness is too thin, it will affect the performance of the semi-dry transfer film; if the coating thickness is too thick, the coating is prone to fall off. Therefore, when coating, we must control the coating thickness to ensure the performance and coating effect of semi-dry transfer film.

semi-dry transfer film coating technology has important application and value in industrial manufacturing, but it is also necessary to pay attention to the above matters in the process of use to ensure the coating quality and coating effect. I hope these precautions will help you when using semi-dry film coating.

Previous： How to use silver sulfate solution correctly?

Next： Techniques and precautions for the synthesis of zinc carbonate

News Categories