Current Location： Home > News > Chemical Knowledge > Distinguish the top-mounted and bottom-mounted type of the screen remover

[Chemical Knowledge]：Distinguish the top-mounted and bottom-mounted type of the screen remover

Read： 595 Time：18months ago Source：Transform the World with Simplicity

The difference between the top-mounted and bottom-mounted

of the screen remover is that in the industrial production process, a large amount of dust and fine particles are often produced, which pollutes the environment and poses a threat to the health of workers. In order to solve this problem, the screen dust collector came into being. The screen dust collector effectively removes particles in the air and improves indoor air quality by means of filtration and adsorption. According to the different installation methods, the screen dust collector can be divided into two types: top-mounted and bottom-mounted.

1. top-mounted wire mesh remover

top-mounted wire mesh remover refers to the wire mesh filter screen installed above the bag filter, dust particles fall off from the pollution source, fall to the filter screen of the dust collector by gravity, particles stay on the filter screen, and clean air enters the exhaust system of the dust collector through the filter mesh of the filter mesh bag. The advantages of this structure are simple design, easy installation and maintenance. It only needs to be installed on the ceiling of an industrial plant, which can effectively collect most of the dust particles, while avoiding direct contact between the dust and the equipment, and reducing the wear of the equipment.

2. bottom-mounted wire mesh remover

bottom-mounted wire mesh remover, that is, the wire mesh filter is installed at the bottom of the bag filter. After the dust particles fall off from the pollution source, they drop to the bottom of the dust collector by gravity, and then the clean air after the coarse initial effect filter is sent to the filter module on the right, and finally discharged to the outside through the ventilation pipe. The feature of the bottom-mounted wire mesh remover is that the wire mesh filter is installed at the bottom of the dust collector, so it can better collect lighter dust particles and reduce the residue of particles and secondary dust.

according to the actual needs of the screen dust collector

whether it is top-mounted or bottom-mounted screen dust collector, has its characteristics and advantages. The choice of suitable screen dust collector should be determined according to the actual demand. If your industrial plant has a high ceiling space and needs high cleanliness, then the top-mounted wire mesh dust collector is a good choice. It can collect dust particles well, reduce the burden of equipment, and keep indoor air fresh. If your industrial site space is low or you need to better collect lighter dust particles, then the bottom-mounted screen dust collector is a good choice. Since the filter is installed at the bottom, it can better collect dust, avoid secondary dust, and improve the dust removal effect.

summary

When choosing a screen dust collector, understanding the difference between top-mounted and bottom-mounted is essential to determine the dust collector suitable for your industrial site. According to factors such as space constraints, process requirements and waste conditions, choosing a suitable dust collector can improve dust removal efficiency, reduce energy consumption, and improve the working environment and employee health. If you have any questions about the screen dust collector, please feel free to consult our professionals, we will be happy to help you.

Previous： Differences and Uses of White Stone Soda and Soda Ash

Next： The difference between filtering up and filtering down: Know the filters you use.

News Categories