Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of propyl ethyl acrylate nitrile

[Chemical Knowledge]：Specification for storage and transport of propyl ethyl acrylate nitrile

Read： 602 Time：20months ago Source：Transform the World with Simplicity

In the field of chemical raw materials, propyl ethyl acrylate nitrile is an important organic compound, which is widely used in synthetic resin, plastic, rubber and other fields. However, due to its toxicity and flammability, it is necessary to strictly comply with relevant safety regulations during storage and transportation to ensure the safety of personnel and the environment.

1. the safety
of propyl ethyl acrylate nitrile
propyl ethyl acrylate nitrile is a toxic, flammable and irritating compound, which is harmful to human body and environment. Prolonged exposure or inhalation of propyl ethyl acrylate nitrile can cause human poisoning, headache, dizziness, nausea and other symptoms, and even life-threatening in severe cases. Therefore, during storage and transportation, strict safety measures must be taken to ensure the safety of personnel and the environment.

2. the storage specification of propyl ethyl acrylate nitrile

1. The storage place should be dry, ventilated and cool, away from open flames, heat sources and oxidants.
2. The storage container shall be a container with good sealing performance, and the integrity of the container and its accessories shall be checked regularly.
3. Obvious safety signs and warning signs shall be set up in the storage area, and corresponding fire fighting equipment and leakage emergency treatment equipment shall be equipped.
4. During storage, temperature and humidity should be strictly controlled to avoid direct sunlight and high temperature environment.

3. Propyl Ethyl Acrylate Nitrile Transportation Specification

1. Before transportation, the integrity of the transportation vehicle should be checked to ensure that the vehicle meets the relevant transportation requirements.
2. Keep running smoothly during transportation to avoid severe vibration and collision.
3. During transportation, the temperature and humidity should be strictly controlled to avoid direct sunlight and high temperature environment.
4. Relevant road traffic safety regulations shall be observed during transportation to ensure transportation safety.
emergency treatment of
4. leakage

in the process of storage and transportation, in case of leakage accident of ethyl acrylate nitrile, the following emergency treatment measures shall be taken:

1. immediately cut off the leakage source, close the valve or take other measures to prevent the leakage from leaking.
2. Absorb the spill with a mixture of sand, dry lime or soda ash and collect it in a closed container.
3. Avoid leakage into restricted spaces such as sewers and flood drainage ditches.
4. For a small amount of leakage, a large amount of water can be used to flush, and the wash water will be diluted into the waste water system.
5. For a large number of leaks, embankments or pits should be constructed and covered with foam to reduce steam disasters. Transfer to the tank or special collector with explosion-proof pump, recycle or transport to the waste treatment site for disposal.

In short, as an important raw material for the production of chemical products, ethyl acrylate nitrile needs to strictly abide by the relevant safety regulations during storage and transportation, and take strict safety measures to ensure the safety of personnel and the environment. At the same time, in the event of a leakage accident, scientific emergency measures should be taken to reduce the harm to the environment and personnel.

Previous： Specification for storage and transport of ethyl ethyl acrylate nitrile

Next： Specification for storage and transport of butyl ethyl acrylate nitrile

News Categories