Read: 513
Time:20months ago
Source:Transform the World with Simplicity
Butyl cyanoacetate safe storage and transportation specification
1. Introduction
Butyl cyanoacetate is an important chemical production raw materials, widely used in medicine, pesticides, plastics and other fields. However, due to its toxicity and flammability, strict compliance with relevant regulations is required during storage and transportation to ensure the safety of personnel and the environment. This article will detail the safe storage and transportation specifications for ethyl butyl cyanoacetate.
2. the nature of ethyl butyl cyanoacetate
ethyl butyl cyanoacetate is a colorless transparent liquid with a pungent odor. It is flammable, fire, high heat caused by combustion explosion. In addition, butyl ethyl cyanoacetate is also toxic, irritating to human skin and eyes, and inhalation of its vapor can cause poisoning.
3. butyl cyanoacetic acid ethyl ester storage specification
1. storage place should choose a cool, ventilated, dry place, away from open flame, heat source.
2. The storage container shall be a special container with good sealing performance to avoid leakage.
3. The storage area shall be equipped with corresponding fire fighting equipment and leakage emergency treatment equipment.
4. During the storage process, the safety status of containers and storage areas should be checked regularly, and any abnormalities should be handled in time.
4. Butyl Cyanoacetate Transport Specifications
1. Transport vehicles should have the appropriate transport qualifications, the driver should undergo professional training.
2. During transportation, the vehicle should be kept running smoothly to avoid severe vibration, collision and friction.
3. Transportation vehicles shall be equipped with corresponding fire fighting equipment and leakage emergency treatment equipment.
4. During transportation, traffic rules shall be strictly observed to avoid illegal acts such as speeding and overloading.
5. Butyl Cyanoacetate Leakage Emergency Treatment
1. If a leak is found, the operation should be stopped immediately, and the leakage source should be closed to prevent the leakage from spreading.
2. For a small amount of leakage, sand, dry lime or soda ash can be mixed and recycled into a special container.
3. For a large number of leaks, embankments or pits should be built and covered with foam to reduce steam disasters. Transfer to the tank or special collector with explosion-proof pump, recycle or transport to the waste treatment site for disposal.
6. butyl ethyl cyanoacetate protective measures
1. respiratory system protection: when the concentration in the air exceeds the standard, you should wear self-priming filter gas mask (half mask). In case of emergency rescue or evacuation, it is recommended to wear air respirator.
2. Eye protection: wear chemical safety glasses.
3. Body protection: wear anti-static overalls.
4. hand protection: wear latex gloves.
5. Other protection: Smoking is strictly prohibited at the work site. After work, shower and change clothes. Pay attention to personal hygiene.
7. conclusion
butyl cyanoacetate as an important raw material for chemical production, its safe storage and transportation is very important. By strictly abiding by the relevant specifications and taking effective protective measures, the harm of ethyl butyl cyanoacetate to personnel and the environment can be reduced, and the production safety can be guaranteed.