Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of butyl propionate

[Chemical Knowledge]：Specification for storage and transport of butyl propionate

Read： 664 Time：20months ago Source：Transform the World with Simplicity

of safe storage and transportation of butyl propionate Butyl propionate is an important chemical raw material, widely used in coatings, inks, adhesives and other fields. However, due to its flammable, toxic and irritating characteristics, butyl propionate has a greater safety risk during storage and transportation. In order to ensure production safety, the relevant safety regulations must be strictly observed.

1. the hazardous properties of butyl propionate

Butyl propionate is a colorless transparent liquid with a pungent odor. The steam and air can form an explosive mixture, fire, high heat caused by combustion explosion. In addition, butyl propionate is also toxic and corrosive, irritating to human skin and eyes, and inhalation of its vapor can lead to poisoning.

2. the safe storage specification of butyl propionate

In order to ensure the safe storage of butyl propionate, the following specifications must be observed:

1. The storage place should be cool and ventilated, away from kindling and heat sources. The temperature in the warehouse should not exceed 30 ℃, and the relative humidity should not exceed 80%.
2. Storage containers must be sealed to prevent leakage. The container should be checked regularly, and the damage and leakage should be dealt with in time.
3. The storage area shall be equipped with corresponding fire-fighting equipment and leakage emergency treatment equipment to deal with emergencies.
4. Avoid contact with oxidants, acids, alkalis and other substances during storage to avoid chemical reactions.

3. safety transportation specifications for butyl propionate

In order to ensure the safe transportation of butyl propionate, the following specifications must be observed:

1. Transportation vehicles should comply with relevant standards and have functions such as fire prevention, explosion prevention, and leakage prevention.
2. Keep stable during transportation to avoid severe vibration and collision.
3. Avoid high temperature, open fire and other dangerous factors during transportation to prevent accidents such as combustion and explosion.
4. During transportation, corresponding fire-fighting equipment and leakage emergency treatment equipment shall be equipped to deal with emergencies.

4. safety operating procedures

In order to ensure the safe use of butyl propionate, the following operating procedures must be observed:

1. Operators must be professionally trained to understand the dangerous characteristics and safe operating procedures of butyl propionate.
2. Before operation, check whether the equipment and containers are in good condition, and deal with damage and leakage in time.
3. Keep stable during operation to avoid violent vibration and collision.
4. Avoid high temperature, open fire and other dangerous factors during operation to prevent combustion, explosion and other accidents.
5. The operation process should be equipped with corresponding protective equipment, such as protective gloves, goggles, etc., to avoid skin, eyes and other contact with butyl propionate.
6. After the operation, the site should be cleaned, and the equipment and containers should be closed to ensure safety.

In conclusion, butyl propionate is an important raw material for chemical production, and its safe storage and transportation are essential. In order to ensure production safety, it is necessary to strictly abide by relevant safety regulations, strengthen the training of management and operators, improve safety awareness, and ensure the safe use of butyl propionate.

Previous： Specification for storage and transport of ethyl propionate

Next： Specification for storage and transport of ethyl methacrylate

News Categories