Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of isobutyl acetate

[Chemical Knowledge]：Specification for storage and transport of isobutyl acetate

Read： 1044 Time：19months ago Source：Transform the World with Simplicity

The safe storage and transportation specification
of isobutyl acetate
1. Introduction

Isobutyl acetate is a common chemical production raw material, widely used in coatings, printing inks, spices and other industries. However, due to its flammable and toxic characteristics, if it does not comply with the corresponding safety regulations during storage and transportation, it may cause accidents and cause harm to personnel and the environment. Therefore, the purpose of this paper is to explore the safe storage and transportation specifications of isobutyl acetate to ensure production safety and personnel health.

2. Physical and Chemical Properties of Isobutyl Acetate

Isobutyl Acetate is a colorless transparent liquid with a fruity aroma. Its boiling point is 142 ° C, flash point is 27 ° C, is a flammable liquid. At the same time, isobutyl acetate has a certain toxicity, long-term exposure or inhalation of its vapor may cause human discomfort, serious can lead to poisoning.

3. the safe storage specification of isobutyl acetate

1. The storage place should choose a dry, ventilated and cool place, away from fire, heat and direct sunlight.
2. The storage container shall be made of corrosion-resistant materials such as stainless steel or galvanized iron drums, and plastic containers shall be avoided.
3. Keep the container closed during storage to prevent volatilization and leakage of isobutyl acetate.
4. The storage site shall be equipped with corresponding fire-fighting equipment and leakage emergency treatment equipment.

4. isobutyl acetate safety transport specification

1. transport vehicles should comply with the relevant standards, with fire, explosion, anti-static and other safety facilities.
2. Keep running smoothly during transportation to avoid severe vibration and collision.
3. During transportation, it should be away from fire source, heat source and high temperature environment, and avoid direct sunlight.
4. Transportation personnel should be professionally trained to understand the nature of isobutyl acetate and safe operating procedures.
Emergency treatment of
5. leakage

If an isobutyl acetate leakage accident occurs, the following measures should be taken:

1. Immediately cut off the leakage source, close the valve or plug the leak.
2. Use sand, dry lime and other inert materials to absorb the leakage and avoid its diffusion and combustion.
3. Collect the leakage into a sealed container and send it to the designated place for treatment.
4. Ventilate the leakage area to eliminate residual gas.

6. safety protection measures

In order to protect the health and life safety of operators, the following safety protection measures should be taken:

1. Operators should wear protective gloves, masks and other personal protective equipment to avoid direct contact with isobutyl acetate.
2. The operation site shall be provided with ventilation facilities to maintain air circulation and reduce the concentration of isobutyl acetate.
3. Regular physical examination of operators, timely detection and treatment of health problems.

7. conclusion

isobutyl acetate as a common chemical production raw material, its safe storage and transportation is very important. By complying with the corresponding safety regulations and taking effective protective measures, the risk of accidents can be reduced to ensure production safety and personnel health. Therefore, relevant enterprises and operators should strengthen the understanding of the safety of isobutyl acetate, strictly abide by the storage and transportation specifications, and ensure the safe and smooth production of chemical products.

Previous： Specification for storage and transport of n-butyl acetate

Next： Specification for storage and transport of tert-butyl acetate

News Categories