Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of cycloheptanol

[Chemical Knowledge]：Specification for storage and transport of cycloheptanol

Read： 903 Time：12months ago Source：Transform the World with Simplicity

Cycloheptanol safety storage and transportation specifications

1. Introduction

Cycloheptanol is a common chemical production raw materials, widely used in medicine, pesticides, spices and other fields. However, due to its flammable, toxic and other characteristics, the safety requirements for storage and transportation are high. In order to ensure the safety of cycloheptanol in the process of production, use and transportation, it is very important to formulate a set of scientific and reasonable storage and transportation specifications.

2. the physical and chemical properties of cycloheptanol

cycloheptanol is a colorless transparent liquid with a special smell. Its molecular formula is C7H14O and its molecular weight is 114.19. Cycloheptanol has a boiling point of 165°C, a flash point of 62°C, and a density of 0.85g/cm3. In addition, cycloheptanol also has flammable, toxic and other characteristics, irritating to human skin and eyes. The risk assessment of

3. cycloheptanol

cycloheptanol may cause combustion or explosion when exposed to open flames, high heat or oxidants. In addition, cycloheptanol is also toxic, and prolonged exposure or inhalation of its vapors may cause poisoning. Therefore, during storage and transportation, special attention needs to be paid to prevent risks such as fire, explosion and poisoning.

4. cycloheptanol storage specification

1. storage place should choose cool, ventilated, dry place, away from fire, heat source and oxidant.
2. The storage container shall be a special container with good sealing performance to avoid leakage and volatilization of cycloheptanol.
3. The storage area shall be provided with obvious safety warning signs, and equipped with corresponding fire-fighting equipment and leakage emergency treatment equipment.
4. Check and maintain the storage container regularly to ensure that it is intact.

5. cycloheptanol transport specifications

1. transport vehicles should have the appropriate qualifications and certificates, drivers should undergo professional training and obtain the appropriate qualifications.
2. During transportation, ensure that the vehicle runs stably to avoid severe vibration, collision and friction.
3. Transport vehicles shall be equipped with corresponding fire-fighting equipment and leakage emergency treatment equipment to deal with emergencies.
4. During transportation, traffic rules and relevant laws and regulations should be strictly observed to ensure transportation safety.

6. cycloheptanol leakage emergency treatment

1. if cycloheptanol leakage occurs, should immediately cut off the leakage source, and use special absorption materials to clean up the leakage.
2. Place the cleaned leakage in a closed container and deal with it in accordance with relevant environmental regulations.
3. In case of large leakage or casualties, the emergency plan shall be started immediately and reported to relevant departments.

7. conclusion

cycloheptanol as a common chemical production raw material, its safety storage and transportation is very important. In order to ensure the safety of cycloheptanol during production, use and transportation, it is necessary to fully understand its physical and chemical properties, evaluate its risk, and formulate scientific and reasonable storage and transportation specifications. By strictly complying with relevant specifications and operating procedures, the risks of cycloheptanol leakage and fire can be reduced, and the safety of people's lives and property can be guaranteed.

Previous： Specification for storage and transport of cyclopentanol

Next： Specification for storage and transportation of allyl alcohol

News Categories