Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of o-isobutylphenol

[Chemical Knowledge]：Specification for storage and transport of o-isobutylphenol

Read： 826 Time：20months ago Source：Transform the World with Simplicity

1. of safe storage and transportation specification
of o-isobutyl phenol Introduction

o-isobutyl phenol is an important chemical raw material, widely used in plastics, rubber, paint, ink and other fields. However, due to its toxicity and flammability, it is necessary to strictly comply with relevant regulations during storage and transportation to ensure safety. This paper will detail the specification of safe storage and transportation of o-isobutylphenol.

2. the physicochemical properties of o-isobutylphenol

o-isobutylphenol is a colorless or slightly yellow transparent liquid with a unique odor of phenols. Its molecular formula is C10H14O and its molecular weight is 150.22. o-isobutylphenol is insoluble in water, soluble in alcohol, ether, acetone, benzene and other organic solvents. Its melting point is -35 ℃, boiling point is 225 ℃, flash point is 104 ℃. o-isobutylphenol has certain toxicity and irritation, which can cause skin and eye irritation and allergy.

3. The safe storage specification of o-isobutylphenol

1. The storage place should be dry, ventilated, and cool, avoiding direct sunlight and high temperature.
2. The storage container shall be well sealed to prevent leakage and volatilization.
3. The storage area should be away from fire source, heat source and oxidant, and it is forbidden to mix with acidic substances and alkaline substances.
4. Regularly check the integrity and tightness of the storage container, and deal with the leakage in time.
5. Operators should wear protective gloves, goggles and other personal protective equipment to avoid direct contact with o-isobutyl phenol.

4. ortho-isobutyl phenol safety transport specification

1. transport vehicles should meet the relevant standards, with fire, explosion, anti-static and other safety measures.
2. During transportation, it should be kept stable to avoid violent vibration and collision.
3. During transportation, it should be away from fire source, heat source and oxidant, and it is forbidden to mix with acidic substances and alkaline substances.
4. Transportation personnel should be professionally trained to understand the physical and chemical properties of o-isobutylphenol and transportation safety knowledge.
5. During transportation, the state of the goods and the integrity of the container should be checked regularly, and the abnormal situation should be handled in time.

5. emergency treatment measures

1. skin contact: immediately take off contaminated clothing, rinse with plenty of flowing water for at least 15 minutes. See a doctor.
2. Eye contact: Lift the eyelid immediately and rinse thoroughly with plenty of flowing water or normal saline for at least 15 minutes. See a doctor.
3. Inhalation: Quickly leave the site to fresh air. Keep the airway unobstructed. If breathing is difficult, give oxygen. If breathing stops, give artificial respiration immediately. See a doctor.
4. Ingestion: Drink plenty of warm water and induce vomiting. See a doctor.
5. Leakage treatment: quickly evacuate the personnel from the contaminated area to the safe area, isolate them and strictly restrict access. Cut off the fire source. It is recommended that emergency personnel wear self-contained positive pressure breathing apparatus and protective clothing. Cut off the leak source as much as possible. Prevent from flowing into restricted spaces such as sewers and flood drainage ditches. Small amount of leakage: adsorption or absorption with sand or other non-combustible materials. It can also be washed with a large amount of water and diluted with washing water into the waste water system. Large leakage: build embankments or dig pits to contain. Transfer to tank truck or special collector by pump, recycle or transport to waste disposal site.

6. conclusion

o-isobutylphenol as an important chemical production raw material, its safe storage and transportation is very important. By strictly abiding by the relevant specifications and taking effective protective measures and emergency treatment measures, the harm of o-isobutylphenol to the environment and human body can be reduced to the greatest extent, and the production safety and personnel health can be guaranteed.

Previous： Specification for storage and transport of p-butylphenol

Next： Specification for storage and transport of m-isobutylphenol

News Categories