Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of m-propyl phenol

[Chemical Knowledge]：Specification for storage and transport of m-propyl phenol

Read： 830 Time：20months ago Source：Transform the World with Simplicity

1. of safety storage and transportation specification
of m-propyl phenol Introduction

m-propyl phenol is an important raw material for chemical production, widely used in medicine, pesticides, spices and other fields. However, due to its toxicity and flammability, strict compliance with relevant regulations is required to ensure safety during storage and transportation. This paper will detail the safe storage and transportation specifications of m-propyl phenol.

2. the properties and hazards of m-propyl phenol

m-propyl phenol is a white crystalline solid with strong toxicity and pungent odor. It is irritating to the eyes, skin and respiratory system, and prolonged exposure to or inhalation of high concentrations of m-propyl phenol vapor may cause poisoning and burns. In addition, m-propyl phenol is also flammable and may cause a fire when exposed to an open flame or high temperature.

3. storage specifications for m-propyl phenol

1. Storage facilities: m-propyl phenol should be stored in a cool, dry, well-ventilated special warehouse, away from direct sunlight and high temperature.
2. Storage container: A container with good sealing performance should be used for storage to prevent leakage and volatilization of m-propyl phenol.
3. Storage identification: Obvious danger identification and warning signs shall be set on the warehouse and storage container, indicating the name, danger and emergency measures of m-propyl phenol.
4. Storage management: Establish a sound storage management system, regularly inspect and maintain warehouses and storage containers to ensure storage safety.

4. m-propyl phenol transportation specifications

1. Transportation vehicles: Special transportation vehicles that meet relevant regulations should be selected for transportation to ensure that the vehicles have good sealing performance and fire protection measures.
2. Transport packaging: m-propyl phenol should be packaged with packaging materials that meet the requirements to ensure that the packaging is tight and firm to prevent leakage and damage during transportation.
3. Transportation routes: reasonable transportation routes should be selected to avoid driving in densely populated areas such as prosperous urban areas and highways to reduce safety risks.
4. Transport personnel: transport personnel should be professionally trained to understand the nature and hazards of m-propyl phenol and master emergency treatment measures to ensure transport safety.

5. emergency treatment measures

1. skin contact: immediately take off the contaminated clothing, rinse with plenty of flowing water for at least 15 minutes.
2. Eye contact: Lift the eyelid immediately and rinse thoroughly with plenty of flowing water or normal saline for at least 15 minutes.
3. Inhalation: Quickly leave the scene to the fresh air place to keep the respiratory tract unobstructed. If breathing is difficult, give oxygen; if breathing stops, give artificial respiration immediately.
4. Ingestion: Drink plenty of warm water, induce vomiting, and seek medical attention.

6. conclusion

m-propyl phenol as an important raw material for chemical production, its safety and standardization of storage and transportation are of great significance to ensure production safety and personnel health. Therefore, in the actual production process, relevant regulations should be strictly observed, management and training should be strengthened to ensure the safety of storage and transportation of m-propyl phenol.

Previous： Specification for storage and transport of o-propyl phenol

Next： Specification for storage and transport of p-propylphenol

News Categories