Current Location： Home > News > Chemical Knowledge > Specification for storage and transportation of phenylethyl alcohol

[Chemical Knowledge]：Specification for storage and transportation of phenylethyl alcohol

Read： 723 Time：20months ago Source：Transform the World with Simplicity

The safety storage and transportation specification
of benzene ethanol
1. Introduction

benzene ethanol is a common organic compound, widely used in the field of chemical production raw materials. Due to its flammable and toxic properties, it is necessary to strictly comply with relevant regulations during storage and transportation to ensure safety. This article will detail the safety storage and transportation specifications of phenylethyl alcohol.

2. the physicochemical properties of phenethyl alcohol

phenethyl alcohol is a colorless transparent liquid with aromatic taste. Its molecular formula is C8H10O and its molecular weight is 122.17. Phenylethyl alcohol is insoluble in water, but is miscible with organic solvents such as alcohols and ethers. The steam and air can form an explosive mixture, fire, high heat caused by combustion explosion. Overview of the hazards of

3. phenylethyl alcohol

phenylethyl alcohol belongs to category 3.2 in flash point flammable liquids, and its hazard category is flammable liquids in GB 30000.2-2013 "Specification for Classification and Labeling of Chemicals Part 2: Hazard Classification. In addition, phenylethyl alcohol is also toxic, and prolonged exposure or inhalation of its vapors may cause poisoning.

4. benzene ethanol safety storage specification

1. storage place should choose cool, ventilated, dry place, away from fire, heat source. The storage temperature should not exceed 30 ℃, and the relative humidity should be kept below 75%.
2. The storage container shall be a special container with good sealing performance to avoid leakage. During the storage process, the container and sealing condition shall be checked regularly, and any abnormality shall be handled in time.
3. The storage area shall be provided with obvious safety warning signs, and equipped with corresponding fire-fighting equipment and leakage emergency treatment equipment.
4. During the storage process, the warehousing, outbound and inventory of phenylethanol shall be strictly controlled to ensure storage safety.

5. benzene ethanol safety transport specification

1. transport vehicles should comply with the relevant standards, with fire, explosion, anti-static and other safety performance. During transportation, drive at a low speed to avoid violent vibration, collision and friction.
2. Before transportation, check whether the packaging of phenylethyl alcohol is in good condition, and deal with the damage and leakage in time. During transportation, the condition of the goods shall be checked regularly to ensure the safety of transportation.
3. During transportation, keep away from fire, high heat and other dangerous sources, and avoid direct sunlight. Transportation vehicles shall be equipped with corresponding fire fighting equipment and emergency treatment equipment for leakage.
4. Transportation personnel shall have corresponding safety awareness and operation skills, and can only take up their posts after passing professional training.

6. phenylethyl alcohol leakage emergency treatment specification

1. found that phenylethyl alcohol leakage, should immediately stop the operation, close the source of leakage, to prevent the spread of leakage.
2. For a small amount of leakage, sand, dry lime or soda ash can be mixed and recycled into a special container. For a large number of leaks, embankments or pits shall be constructed and covered with foam to reduce steam disasters.
3. Wear protective gloves and protective clothing when handling the leakage to avoid direct contact with the leakage. In case of contact with skin or eyes, rinse immediately with water.
4. After cleaning, the leakage area shall be ventilated to ensure safety before operation can be resumed.

7. conclusion

phenylethyl alcohol as a common chemical production raw material, its safety storage and transportation is very important. By strictly complying with relevant regulations and taking effective protective measures, the safety risks of phenylethyl alcohol during storage and transportation can be reduced, and the safety of personnel and the environment can be guaranteed.

Previous： Specification for storage and transport of biphenol

Next： Specification for storage and transport of o-ethylphenol

News Categories