Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of chloroisopropyleneacetone

[Chemical Knowledge]：Specification for storage and transport of chloroisopropyleneacetone

Read： 770 Time：20months ago Source：Transform the World with Simplicity

Chloroisopropyl Acetone (CIPA) is a common raw material for chemical production, which is widely used in medicine, pesticide, spice and other fields. Due to its flammable and toxic properties, it is necessary to strictly comply with relevant regulations during storage and transportation to ensure safety. This article will detail the safety storage and transportation specifications for chloroisopropyleneacetone.

1. the physicochemical properties of chloroisopropylacetone

chloroisopropylacetone is a colorless transparent liquid with pungent odor. Its molecular formula is C5H7ClO and its molecular weight is 118.56. The chloroisopropyleneacetone has a melting point of -52°C, a boiling point of 145°C, a flash point of 43°C and a density of 1.07g/cm3. It is insoluble in water, but miscible with organic solvents such as alcohols and ethers.

2. of Chloroisopropyleneacetone Hazard

Chloroisopropyleneacetone is a flammable liquid, which can cause combustion and explosion in case of open flame and high heat. At the same time, it is also toxic. It can enter the human body through inhalation, ingestion and skin contact, causing irritation to the eyes, skin and respiratory system, and can lead to poisoning in severe cases. Therefore, special attention is required during storage and transportation.

3. chloroisopropyleneacetone storage specification

1. The storage place should choose a cool, ventilated and dry place, away from fire, heat and direct sunlight.
2. The storage container shall be a special container with good sealing performance to avoid leakage and volatilization.
3. The storage area shall be provided with obvious safety warning signs, and equipped with corresponding fire-fighting equipment and leakage emergency treatment equipment.
4. Check and maintain the storage container regularly to ensure that it is intact.

4. of chlorinated isopropyleneacetone transport specification

1. transport vehicles should have the corresponding qualification of dangerous goods transport, drivers and escorts need to undergo professional training and obtain the corresponding qualification certificate.
2. During transportation, ensure that the vehicle runs smoothly to avoid severe vibration and collision.
3. Transport vehicles shall be equipped with corresponding fire-fighting equipment and leakage emergency treatment equipment to deal with emergencies.
4. During transportation, relevant laws, regulations and regulations shall be observed to ensure safe transportation.

5. leakage of chloroisopropyleneacetone emergency treatment

1. In case of chloroisopropyleneacetone leakage, the emergency treatment plan should be started immediately and professionals should be organized to deal with it.
2. A warning line shall be set up in the leakage area to prohibit irrelevant personnel from entering.
3. Use special absorbent materials to clean up the leakage and avoid flowing into sewers or drains.
4. Ventilate the cleaned site to ensure safety.

In conclusion, as a common raw material for the production of chemical products, the safety of storage and transportation regulations are very important. Relevant units and individuals should strictly abide by relevant regulations and operating specifications to ensure the storage and transportation safety of chloroisopropyleneacetone and avoid accidents.

Previous： Specification for storage and transport of chloroisobutyl ketone

Next： Specification for storage and transport of fluorinated acetone

News Categories