Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of o-toluidine

[Chemical Knowledge]：Specification for storage and transport of o-toluidine

Read： 364 Time：14months ago Source：Transform the World with Simplicity

The safe storage and transportation specification
of o-toluidine
1. Introduction

o-toluidine is a common chemical production raw material, widely used in dyes, medicine, pesticides and other fields. However, due to its toxicity and flammability, strict compliance with relevant regulations is required during storage and transportation to ensure the safety of personnel and the environment. This article will detail the safe storage and transportation specifications for o-toluidine.

2. the physical and chemical properties of o-toluidine

o-toluidine is a colorless or slightly yellow transparent liquid with a special odor. Its melting point is -23 ℃, boiling point is 199 ℃, relative density is 0.966, flash point is 76 ℃. o-Toluidine is insoluble in water and soluble in organic solvents such as alcohol and ether. In addition, o-toluidine is toxic and flammable, and in case of open flame, high heat or oxidant contact, there is a risk of combustion and explosion.

3. the safe storage specification of o-toluidine

1. The storage place should choose a dry, ventilated and cool place, away from fire sources, heat sources and oxidants.
2. The storage container shall be a special container with good sealing performance to avoid leakage and volatilization.
3. The storage area shall be provided with obvious safety warning signs, and equipped with corresponding fire-fighting equipment and leakage emergency treatment equipment.
4. Check and maintain the storage container regularly to ensure that it is intact.

4. o-toluidine safety transport specification

1. Transport vehicles should have the corresponding transport qualification, drivers and escorts should be professionally trained and obtain the corresponding qualification certificate.
2. During transportation, ensure that the vehicle runs stably to avoid severe vibration, collision and friction.
3. Transport vehicles shall be equipped with corresponding fire-fighting equipment and leakage emergency treatment equipment to deal with emergencies.
4. Relevant road traffic safety laws and regulations shall be observed during transportation to ensure transportation safety.

5. o-toluidine leakage emergency treatment

1. In case of o-toluidine leakage, the emergency plan should be started immediately and professionals should be organized to deal with it.
2. Cut off the leakage source and use special adsorption material to recycle the leakage.
3. Avoid leakage into sewers, drains and other restricted spaces to prevent environmental pollution.
4. Ventilate the leakage area to ensure that the air quality meets safety standards.
protective measures for
6. o-toluidine

1. personnel exposed to o-toluidine should wear professional protective gloves, masks and other personal protective equipment to avoid direct contact.
2. Regular health examination of personnel exposed to o-toluidine, timely detection and treatment of possible health problems.
3. During the production, storage and transportation of o-toluidine, the relevant safety operation regulations shall be strictly observed to ensure the safety of personnel and the environment.

7. conclusion

o-toluidine as a common chemical production raw material, in the process of storage and transportation need to strictly abide by the relevant norms, in order to ensure the safety of personnel and the environment. By understanding its physical and chemical properties, safe storage specifications, safe transportation specifications, leakage emergency treatment and protective measures, we can effectively prevent and deal with possible safety risks and ensure the smooth progress of production activities.

Previous： n-Butyl acetate. Storage methods and transport specifications

Next： Specification for storage and transport of dimethylethanolamine

News Categories