Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of ethylene glycol tert-butyl ether (ETB)

[Chemical Knowledge]：Specification for storage and transport of ethylene glycol tert-butyl ether (ETB)

Read： 420 Time：17months ago Source：Transform the World with Simplicity

Specification
for safe storage and transportation of ethylene glycol tert-butyl ether (ETB)
Ethylene glycol tert-butyl ether (ETB) is a common raw material for chemical production, which is widely used in paint, coating, printing ink and other fields. However, due to its flammable, toxic and other characteristics, it is necessary to strictly comply with relevant regulations during storage and transportation to ensure the safety of personnel and the environment.

1. Ethylene Glycol Tertiary Butyl Ether (ETB) Physicochemical Properties and Hazard Overview

Ethylene Glycol Tertiary Butyl Ether (ETB) is a colorless, transparent liquid with an ether-specific odor. It is flammable, the case of open flame, high heat or oxidant contact, there is a risk of combustion and explosion. In addition, the steam of ETB is heavier than air and can spread to a considerable distance at a lower place, and it will catch fire and backburn in case of fire source. In case of high heat, the internal pressure of the container increases, and there is a risk of cracking and explosion. Therefore, special attention is required during storage and transportation.

2. ethylene glycol tert-butyl ether (ETB) storage specification

1. storage place should be selected in a well-ventilated, suitable temperature place, away from fire, heat and direct sunlight.
2. Storage containers must comply with relevant standards and be inspected and maintained regularly to ensure that they are intact.
3. The storage area shall be equipped with corresponding fire fighting equipment and leakage emergency treatment equipment.
4. The temperature and pressure should be strictly controlled during storage to avoid overpressure and overtemperature.

3. ethylene glycol tert-butyl ether (ETB) transport specifications

1. transport vehicles should comply with the relevant standards, with the corresponding fire, explosion, leakage and other safety measures.
2. During transportation, it should be stable to avoid violent vibration, collision and friction.
3. The temperature and pressure should be strictly controlled during transportation to avoid overpressure and overtemperature.
4. During transportation, relevant traffic rules, laws and regulations shall be observed to ensure safe transportation.

4. glycol tert-butyl ether (ETB) leakage emergency treatment specification

1. In case of leakage, the leakage source should be cut off immediately, mixed with sand, dry lime or soda ash and recycled to the waste treatment site for disposal.
2. In case of a large amount of leakage, embankment or pit shall be constructed and covered with foam to reduce steam disaster. Transfer to tank truck or special collector with explosion-proof pump, recycle or transport to waste treatment site for disposal.

5. ethylene glycol tert-butyl ether (ETB) safe operation specification

1. Operators must be specially trained and strictly abide by the operating procedures.
2. Wear anti-static overalls and gas masks during operation to avoid direct contact with ETB.
3. The temperature and pressure should be strictly controlled during operation to avoid overpressure and overtemperature.
4. Keep well ventilated during operation to avoid ETB vapor accumulation.

In conclusion, ethylene glycol tert-butyl ether (ETB), as a common raw material for chemical production, has certain risks in the process of storage, transportation and operation. Therefore, it is necessary to strictly abide by the relevant specifications and safety operation procedures to ensure the safety of personnel and the environment.

Previous： Specification for storage and transport of tetrahydrofuran (THF)

Next： Specification for storage and transportation of adipic acid

News Categories