Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of isopropyl acetate (IPAC)

[Chemical Knowledge]：Specification for storage and transport of isopropyl acetate (IPAC)

Read： 647 Time：19months ago Source：Transform the World with Simplicity

Isopropyl acetate (IPAC) is a commonly used raw material for chemical production. Due to its flammable and toxic properties, it is necessary to strictly comply with relevant safety regulations during storage and transportation. This article will detail the safety storage and transportation specifications of isopropyl acetate. Overview of the physicochemical properties and hazards of

1. Isopropyl acetate

Isopropyl acetate is a colorless transparent liquid with a pungent odor. It is flammable, fire, high heat caused by combustion explosion. In addition, isopropyl acetate is also toxic. It can enter the human body through inhalation, ingestion and skin contact, and has a stimulating effect on the eyes, skin and mucous membranes. Inhalation of high concentrations of isopropyl acetate can cause laryngeal edema and bronchitis.

2. the storage specification of isopropyl acetate

1. The storage place should be in a cool, well-ventilated place away from fire and heat sources, and set up "no fireworks" and other safety signs.
2. The storage container shall meet the relevant standards and have sufficient strength and tightness to prevent leakage.
3. During the storage process, the integrity of the container and its accessories should be checked regularly, and the damage and leakage should be dealt with in time.
4. Should be stored separately from oxidants, acids, alkalis, etc., do not mix storage.

3. of isopropyl acetate transportation specifications

1. Transportation vehicles should meet relevant standards and have sufficient strength and sealing to prevent leakage accidents.
2. Before transportation, check the integrity of the container and its accessories to ensure that there is no leakage accident during transportation.
3. During transportation, it should be kept stable to avoid severe vibration, collision and friction.
4. During transportation, keep away from fire and heat sources and prevent direct sunlight.
5. It is strictly prohibited to mix with oxidants, acids, alkalis, etc.

4. isopropyl acetate leakage treatment specification

1. small amount of leakage: with sand or other non combustible material adsorption or absorption, can also be washed with a large amount of water, washing water diluted into the waste water system.
2. A large number of leaks: build a dam or dig a pit to accommodate; cover with foam to reduce steam disasters. Transfer to tank truck or special collector with explosion-proof pump, recycle or transport to waste treatment site for disposal.
protective measures of isopropyl acetate
5.

1. respiratory system protection: when the concentration in the air exceeds the standard, you should wear self-absorption filter gas mask (half mask). In case of emergency rescue or evacuation, it is recommended to wear air respirator.
2. Eye protection: wear chemical safety glasses.
3. Body protection: wear anti-static overalls.
4. hand protection: wear latex gloves.
5. Other protection: Smoking is strictly prohibited at the work site. After work, shower and change clothes. Pay attention to personal hygiene.

6. of isopropyl acetate First-aid measures

1. Skin contact: remove contaminated clothing and rinse the skin thoroughly with soapy water and water.
2. Eye contact: Lift the eyelid and flush with flowing water or normal saline. Seek medical attention.
3. Inhalation: Quickly leave the site to fresh air. Keep the airway unobstructed. If breathing is difficult, give oxygen. If breathing stops, give artificial respiration immediately. Seek medical attention.
4. Ingestion: Drink plenty of warm water and induce vomiting. Seek medical attention.

In short, isopropyl acetate, as a commonly used chemical production raw material, needs to strictly comply with relevant safety regulations during storage and transportation to ensure the safety of personnel and the environment.

Previous： Specification for storage and transport of n-propyl ester

Next： Specification for storage and transport of dimethyl carbonate (DMC)

News Categories