Current Location： Home > News > Chemical Knowledge > PC/ABS. Storage methods and transport specifications

[Chemical Knowledge]：PC/ABS. Storage methods and transport specifications

Read： 354 Time：20months ago Source：Transform the World with Simplicity

PC/ABS plastic in the field of chemical production of raw materials in the safety of storage and transportation specifications

1. Introduction

PC/ABS plastic is a widely used in the field of chemical production of raw materials of high-performance engineering plastics, because of its excellent physical properties and processing performance, is widely used in automotive, electronic appliances, construction and other fields. However, due to its special chemical properties, PC/ABS plastics have certain safety risks during storage and transportation. Therefore, it is very important to develop a safe storage and transportation specification for PC/ABS plastics.

2. the physical and chemical properties of PC/ABS plastic

PC/ABS plastic is made of polycarbonate (PC) and acrylonitrile-butadiene-styrene copolymer (ABS) blend, both PC high strength, high thermal stability, excellent electrical insulation and ABS easy processing, low cost and other advantages. However, PC/ABS plastics are prone to degradation under heat, light, oxidation and other conditions, producing harmful gases, causing harm to the human body and the environment.

3. PC/ABS plastic safety storage specification

1. storage environment: PC/ABS plastic should be stored in a dry, cool, well-ventilated indoor environment, avoid direct sunlight and high temperature environment.
2. Storage container: Special plastic containers or packaging bags should be used for storage to avoid contact with metal containers to avoid chemical reactions.
3. Storage period: PC/ABS plastic has good long-term storage stability, but it is recommended that the storage period should not exceed two years to avoid degradation and aging.

4. PC/ABS plastic safety transport specification

1. transport packaging: PC/ABS plastic should be used for special plastic bags or cartons for packaging, to ensure tight packaging, moisture, shockproof.
2. Mode of transportation: Safe and fast modes of transportation, such as cars, trains, ships, etc., should be selected to avoid long-distance transportation and exposure to adverse environments.
3. Transport insurance: In order to ensure the safety of the goods, appropriate transport insurance should be purchased to cover possible accidents.

5. safety operation specification

1. operators should receive relevant training, understand the nature of PC/ABS plastic and safe operation procedures.
2. During the operation, avoid plastic powder or particles from entering the eyes, nose and mouth to avoid harm to the human body.
3. In case of any accident, stop the operation immediately, take corresponding measures to deal with it, and report to relevant personnel in time.

6. waste disposal specification

1. waste PC/ABS plastic should be classified and stored to avoid mixing with other waste.
2. It is recommended to use pyrolysis, incineration and other methods for waste treatment to ensure that the harmful gases generated during the treatment process are effectively controlled and treated.
3. Disposal of waste shall comply with relevant environmental regulations and standards to ensure that no harm is caused to the environment.

7. summary

PC/ABS plastics have a wide range of applications in the field of chemical production raw materials, but its safety storage and transportation regulations are very important. By complying with the relevant operating procedures and waste disposal specifications, it can ensure that the production, use and disposal of PC/ABS plastics are safe and environmentally friendly, and provide protection for the safety of humans and the environment.

Previous： Specification for storage and transportation of PA66

Next： Specification for storage and transport of LDPE polyethylene

News Categories