Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of chromium oxide

[Chemical Knowledge]：Specification for storage and transport of chromium oxide

Read： 1053 Time：20months ago Source：Transform the World with Simplicity

1. of safe storage and transportation specification
of chromium oxide Introduction

Chromium oxide is a common chemical production raw material, widely used in metallurgy, ceramics, pigments, catalysts and other fields. However, due to its toxicity, it may cause harm to the environment and human health. Therefore, it is necessary to strictly comply with relevant regulations during storage and transportation to ensure safety. The purpose of this paper is to discuss the safe storage and transportation specifications of chromium oxide to ensure production safety and environmental safety.

2. the properties and hazards of chromium oxide

chromium oxide is a toxic inorganic compounds, common forms of green and black solid powder. It has a stimulating effect on human skin and respiratory system, and long-term exposure may lead to chronic poisoning, respiratory inflammation, pulmonary fibrosis and other diseases. In addition, chromium oxide will cause pollution to the environment and destroy the ecological balance.

3. chromium oxide safe storage specification

1. Storage facilities: chromium oxide should be stored in a dry, cool, well-ventilated special warehouse, away from fire, heat and direct sunlight. The warehouse floor should be flat, non-slip, and with anti-leakage measures.
2. Storage container: Chromium oxide should be stored in a container with good sealing performance to avoid contact with air. The container shall be marked with the name, concentration, manufacturer and date of the chromium oxide.
3. Storage management: Inventory counts should be conducted regularly during storage to ensure that the accounts match. The expired and deteriorated chromium oxide shall be properly disposed to prevent environmental pollution.

4. of chromium oxide safety transport specification

1. transport vehicles: chromium oxide should be used for special transport vehicles for dangerous chemicals, vehicles should have the corresponding fire prevention, explosion prevention, leakage prevention and other safety facilities.
2. Transport packaging: The packaging of chromium oxide should meet relevant standards, have sufficient strength, and be able to withstand vibration and impact during transportation. Packing shall be tight to prevent leakage of chromium oxide.
3. Transportation route: reasonable transportation route shall be selected during transportation, and densely populated areas and environmentally sensitive areas shall be avoided as far as possible. At the same time, traffic rules should be observed to ensure transportation safety.
4. Transportation personnel: transportation personnel shall have the corresponding qualification for transportation of hazardous chemicals and safety production knowledge, be familiar with the nature and hazards of chromium oxide, and master the emergency treatment measures.

5. chromium oxide emergency measures

1. skin contact: if the skin comes into contact with chromium oxide, immediately rinse with plenty of water, and seek medical assistance.
2. Eye contact: If eyes come into contact with chromium oxide, rinse immediately with plenty of water and seek medical attention.
3. Inhalation: If inhaling chromium oxide dust, immediately leave the polluted environment, breathe fresh air in a well-ventilated place, and seek medical assistance.
4. Leakage treatment: In case of leakage of chromium oxide, measures shall be taken immediately to prevent the leakage from spreading, and the leakage shall be collected and properly treated. At the same time, it should be reported to the local environmental protection department and disposed of in accordance with relevant regulations.

6. conclusion

chromium oxide as a common chemical raw material, its safe storage and transportation is very important. In order to ensure production safety and environmental safety, enterprises should strictly abide by relevant regulations and strengthen the storage and transportation management of chromium oxide. At the same time, the safety awareness and operation skills of employees should be improved to ensure that effective measures can be taken quickly in emergency situations to reduce the risk of accidents.

Previous： Specification for storage and transport of titanium dioxide

Next： Specification for storage and transport of cobalt oxide

News Categories