Current Location： Home > News > Chemical Knowledge > Specification for storage and transportation of splicing glue

[Chemical Knowledge]：Specification for storage and transportation of splicing glue

Read： 970 Time：20months ago Source：Transform the World with Simplicity

1. of safety storage and transportation specifications
of splicing glue in the field of chemical production raw materials Introduction

splicing glue plays an important role in the production of chemical products, but because of its special chemical properties, it has strict requirements on the safety of storage and transportation. In order to ensure the safety of the glue in the production, storage and transportation process, and prevent possible environmental pollution and personal injury, it is very necessary to formulate a set of strict specifications.

the safety of 2. plaster storage specification

1. storage facilities: the facilities for storing plaster should have the functions of fire prevention, explosion prevention and leakage prevention, and ensure good ventilation. Temperature and humidity monitoring equipment shall be installed in the facility to maintain a suitable storage environment.
2. Storage container: The splicing glue should be stored in a container with corrosion resistance and good sealing performance, and ensure that the container is intact and free of leakage during storage.
3. Storage location: The splicing glue should be stored in a cool, dry, well-ventilated place, away from fire, heat and direct sunlight. At the same time, storage with incompatible substances should be avoided.
4. Storage management: The area where the glue is stored shall be provided with obvious safety signs and equipped with corresponding fire-fighting equipment and emergency measures. At the same time, the stored glue should be regularly inspected and maintained.

3. of the safety of the plank glue transport specification

1. transport vehicles: transport plank glue vehicles should have the appropriate qualifications and certificates, and to ensure that the vehicle is in good condition, safe and reliable. The vehicle shall be equipped with safety facilities such as fire prevention, explosion-proof and leakage prevention.
2. Transport packaging: The transport packaging of the plaster shall comply with the requirements of relevant regulations and standards to ensure that there will be no leakage or damage during transportation. At the same time, the packaging should be clearly marked with the name of the glue, danger and transportation precautions and other information.
3. Transportation route: reasonable transportation route should be selected to avoid passing through sensitive areas such as densely populated areas and water source protection areas. At the same time, it should be ensured that traffic rules and relevant regulations are observed during transportation.
4. Transportation personnel: The personnel who transport the splice shall have corresponding qualifications and certificates, and receive relevant safety training and education. In the process of transportation, we should be vigilant, find and deal with possible abnormal situations in time.

1. Personnel protection: When dealing with the leakage accident of
4., personal protective equipment such as protective clothing, gloves and goggles should be worn to avoid direct contact with the leakage.
2. Leakage treatment: when a small amount of leakage, sand or other non-combustible adsorbent can be collected in the container after adsorption; when a large amount of leakage, methods such as embankment and pit storage should be adopted to cover with foam to reduce steam disaster. Transfer to tank truck or special collector by pump, recycle or transport to waste disposal site.

5. summary

The safe storage and transportation of splicing glue in the field of chemical production raw materials is very important, and it is necessary to strictly comply with relevant specifications and operating requirements to ensure safety during storage and transportation. At the same time, in the event of a leakage accident, scientific emergency treatment measures should be taken to reduce the impact on the environment and personnel. By strengthening management and training, improve the safety awareness and operation skills of the staff, and provide guarantee for the safe and stable operation of chemical production.

Previous： Specification for storage and transportation of white latex

Next： Specification for storage and transport of titanium dioxide

News Categories