Read: 580
Time:12months ago
Source:Transform the World with Simplicity
1. of safety storage and transportation specification
of cyclohexanone Introduction
cyclohexanone is a common chemical production raw material, widely used in organic synthesis, solvents, plastics, coatings and other fields. However, due to its special physical and chemical properties, cyclohexanone has certain security risks during storage and transportation. In order to ensure production safety and reduce the risk of accidents, it is very important to formulate safe storage and transportation specifications for cyclohexanone.
2. the physical and chemical properties of cyclohexanone
cyclohexanone is a colorless and transparent liquid with a special pungent odor. It is soluble in water, ethanol, ether and other organic solvents, but insoluble in petroleum ether. Cyclohexanone has a low flash point, is flammable and explosive, and has a stimulating effect on the skin and mucous membranes.
3. Cyclohexanone Safety Storage Specification
1. The storage place should choose a cool, ventilated and dry place, away from fire, heat and direct sunlight.
2. The storage container shall be a special storage tank with good sealing performance to avoid leakage and volatilization of cyclohexanone.
3. Fire fighting equipment and leakage emergency treatment equipment shall be set in the storage area to deal with emergencies.
4. During storage, the tightness and safety of the storage tank should be checked regularly to ensure that the storage equipment is intact.
4. safety transportation specification
1. Transportation vehicles should meet the requirements of dangerous chemicals transportation, and have corresponding safety measures such as fire prevention, explosion prevention and leakage prevention.
2. During transportation, stable driving shall be maintained to avoid severe vibration, collision and friction to prevent leakage of cyclohexanone.
3. Transportation personnel shall be professionally trained and familiar with the physical and chemical properties of cyclohexanone and transportation safety knowledge.
4. Carry the corresponding emergency treatment equipment and protective equipment during transportation to deal with emergencies.
5. Cyclohexanone Leakage Emergency Treatment
1. In case of Cyclohexanone leakage, the leakage source should be cut off immediately, and the residual liquid should be absorbed by mixing sand, dry lime or soda ash.
2. When there is a large amount of leakage, embankment or pit shall be built and covered with foam to reduce steam disaster. Transfer to tank truck or special collector with explosion-proof pump, recycle or transport to waste treatment site for disposal.
protective measures for
6. cyclohexanone production personnel
contact with cyclohexanone should do the following protective measures:
1. respiratory system protection: when the concentration in the air exceeds the standard, they should wear self-absorption filtering gas mask (half mask). In case of emergency rescue or evacuation, it is recommended to wear air respirator.
2. Eye protection: wear chemical safety glasses.
3. Body protection: wear anti-static overalls.
4. Hand protection: wear anti-benzene and oil-resistant gloves.
5. Others: Smoking is strictly prohibited at the work site. Pay attention to personal hygiene. Avoid long-term repeated contact.
7. conclusion
cyclohexanone as a common chemical production raw material, its safe storage and transportation is very important. By understanding the physical and chemical properties of cyclohexanone, strictly abiding by the storage and transportation specifications, and taking effective protective measures and emergency treatment measures, the accident risk can be reduced and the production safety can be guaranteed.