Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of dimethyl siloxane mixed rings

[Chemical Knowledge]：Specification for storage and transport of dimethyl siloxane mixed rings

Read： 1021 Time：12months ago Source：Transform the World with Simplicity

The safety storage and transportation specification
of dimethyl siloxane mixed ring
dimethyl siloxane mixed ring is a common raw material for chemical production, which is widely used in the preparation of silicone rubber, silicone oil, silicone resin and other chemical products. Due to its special chemical properties, the storage and transportation of dimethylsiloxane mixed rings require strict compliance with certain safety regulations to ensure personnel safety and environmental protection. This article will detail the safety storage and transportation specifications for dimethylsiloxane hybrid rings.

1. dimethyl siloxane mixed ring body of the risk of overview

dimethyl siloxane mixed ring body is a flammable liquid, in case of fire, high heat or contact with oxidant, there is a danger of causing combustion explosion. In addition, dimethylsiloxane mixed rings have certain toxicity and irritation, and have irritating effects on human skin and eyes. Long-term exposure may have adverse effects on health. Therefore, during storage and transportation, special attention needs to be paid to safety issues.

2. Dimethyl siloxane mixed ring storage specification

1. The storage place should choose a cool, ventilated and dry place, away from open flame, heat source and oxidant.
2. The storage container shall be a special container with good sealing performance to avoid leakage and volatilization.
3. The storage area shall be equipped with fire fighting equipment and leakage emergency treatment equipment to deal with emergencies.
4. During the storage process, the safety status of containers and storage areas should be checked regularly, and problems such as leakage and volatilization should be found and dealt with in time.

3. dimethyl siloxane mixed ring body transport specification

1. transport vehicles should have the appropriate transport of dangerous goods qualification, drivers and escorts need to be professionally trained and certified.
2. During transportation, it is necessary to maintain smooth driving and avoid severe vibration, collision and friction to prevent damage and leakage of the container.
3. Transport vehicles shall be equipped with corresponding fire-fighting equipment and leakage emergency treatment equipment to deal with emergencies.
4. Relevant road traffic safety regulations shall be observed during transportation to ensure transportation safety.

4. safety precautions for the safe operation of the dimethyl siloxane mixed ring

1. Operators should be professionally trained to understand the nature of the dimethyl siloxane mixed ring and safe operating procedures.
2. Personal protective equipment such as protective clothing, gloves and goggles should be worn during operation to avoid direct contact with dimethyl siloxane mixed ring.
3. The operation area should be equipped with ventilation facilities to maintain air circulation and avoid the accumulation of harmful gases.
4. During the operation, the safety operation regulations shall be strictly observed, and illegal operation and behavior shall be prohibited.

5. Dimethyl siloxane mixed ring body leakage emergency treatment measures

1. found leakage should immediately stop operation, close the source of leakage, to prevent the spread of leakage.
2. Use special absorption materials to absorb the leakage to avoid combustion and explosion caused by contact with open flame and heat source.
3. Place the absorbed waste in a special container and dispose of it in accordance with relevant regulations.
4. In case of emergency such as large leakage or fire, the emergency plan shall be started immediately and personnel shall be evacuated.

In short, the safe storage and transportation regulations of dimethylsiloxane hybrid rings are essential to ensure personnel safety and environmental protection. In the actual operation process, the relevant specifications and standards should be strictly observed to ensure the safety and reliability of the storage and transportation process.

Previous： Specification for storage and transport of dimethyldichlorosilane

Next： Specification for storage and transportation of high hydrogen-containing silicone oil

News Categories