Current Location： Home > News > Chemical Knowledge > Specification for storage and transport of dispersion concentrates

[Chemical Knowledge]：Specification for storage and transport of dispersion concentrates

Read： 890 Time：12months ago Source：Transform the World with Simplicity

In the field of raw materials for chemical production, the safe storage and transportation specifications
of dispersed concentrate
1. Introduction

In the chemical production process, dispersed concentrate is a common raw material. Due to its special physical and chemical properties, the storage and transportation of dispersed concentrates requires strict compliance with safety regulations to prevent accidents. This article will detail the safe storage and transportation specifications of dispersed concentrates to ensure the smooth progress of the production process and the safety of employees.

Properties and Hazards of 2. Dispersion Concentrates

dispersion concentrates are typically highly chemically reactive and corrosive, and readily react with water and oxygen in the air, generating large amounts of heat and pressure. If the storage and transportation is improper, it is easy to cause accidents such as fire, explosion and poisoning, which will bring serious threats to the production of enterprises and the life safety of employees.

3. dispersion concentrated liquid safety storage specification

1. storage facilities: dispersion concentrated liquid should be stored in special storage facilities, facilities should have good ventilation, fire and explosion-proof performance, and equipped with corresponding safety facilities and equipment.
2. Storage conditions: The container for storing the dispersion concentrate should meet relevant standards, have sufficient strength and sealing performance, and prevent leakage and volatilization. Storage temperature should be controlled in a suitable range, avoid direct sunlight and high temperature environment.
3. Storage management: A sound storage management system for decentralized concentrates should be established, including provisions for warehousing, outbound, storage, and inspections. Regularly conduct safety inspections and maintenance to ensure the normal operation of storage facilities.

4. dispersion concentrated liquid safety transport specification

1. transport vehicles: should be selected with appropriate qualifications and performance of special transport vehicles, to ensure that the vehicle has good sealing, shock and explosion-proof performance.
2. Transportation conditions: During transportation, a stable speed and driving route should be maintained to avoid severe vibration and collision. During transportation, the temperature should be controlled to avoid the influence of high temperature environment on the dispersion concentrate.
3. Transportation management: A complete transportation management system for dispersed concentrated liquid should be established, and professional training should be provided to transportation personnel to ensure safety and reliability during transportation.

5. dispersion concentrate leakage emergency treatment measures

In the process of storage and transportation of dispersion concentrate, once leakage accident occurs, the following emergency treatment measures shall be taken:

1. Immediately start the emergency plan, organize professionals to deal with it, and report to the superior competent department at the same time.
2. Cut off the leakage source and use special equipment to recycle the leakage to avoid the leakage diffusion and environmental pollution.
3. Use special equipment to clean and treat the leakage area to eliminate potential safety hazards.
4. Conduct health examination and treatment for the affected personnel to ensure their health.

6. conclusion

dispersion concentrate is an important raw material in the chemical production process, and its safe storage and transportation are very important to ensure the smooth progress of the production process and the safety of employees. Therefore, enterprises should establish a sound management system for the storage and transportation of dispersed concentrates, strengthen safety training and education for employees, and improve safety awareness and skills. At the same time, regular safety inspections and maintenance should be carried out to ensure the normal operation of storage and transportation facilities and provide a strong guarantee for the safe production of enterprises.

Previous： Specification for storage and transport of PTFE in suspension

Next： Specification for storage and transport of hexafluoropropylene

News Categories